Yokogawa Test & Measurement Corporation announces the launch of its second generation of split-core AC/DC current sensors, the CT500SA and CT200SA. Designed for space-constrained environments, such as xEV vehicle testing, they offer high-precision current measurements in the 200 A and 500 A ranges.
High-voltage batteries for electric vehicles have become highly complex systems comprised of numerous components. The market for these batteries is increasingly dynamic, and the technologies are constantly evolving: innovative battery cells with new chemical compositions are being introduced.
The CMU DC current monitoring system detects system loads and provides early warning of faults. The information is displayed directly on the device's optical screen or via a remote signal. At only 8 mm wide, the current measuring unit not only saves space in the control cabinet but is also ready for immediate use thanks to its intuitive operation and intelligent bridging capability via the Clipline complete DIN rail terminal block program.
Danisense introduces its MK500ID, its first high-precision AC and DC clamp meter designed for galvanically isolated measurements up to 500 A rms.
The MK500ID clamp meter offers exceptional performance, including an industry-leading phase shift of only 0.05° at frequencies below 100 Hz.
GS Yuasa will present its new Traction Mind Battery Monitoring System (TM-BMS) at LogiMAT 2026, positioning the launch as one of the highlights of its presence at Europe's leading intralogistics trade fair, which will take place from March 24-26, 2026 at Messe Stuttgart
OMICRON is pleased to announce the launch of the CPX 200, its new multifunctional, modular, and compact test equipment, developed to meet the engineering requirements of current and future electrical systems. This device represents a technological leap forward in terms of power, safety, operational flexibility, and integrated test management for substations, transformers, and switchgear.
LEM presents a series of direct current (DC) meters. With the introduction of the DCES600 and DCES1500, LEM empowers DC charging infrastructure manufacturers to accelerate the commercialization of fast-charging and megawatt-hour solutions by offering kilowatt-hour (kWh) billing services.
The DCES600 and DCES1500 counters meet numerous direct current (DC) sensing requirements. They are designed to achieve Class B accuracy on chargers for currents up to 1500 A, with an operating temperature range of –40 °C to +85 °C without performance loss.
ABB's D1M analyzers feature DIN rail mounting, offering a scalable solution to adapt to various monitoring needs:
- By meeting the precision standards set in IEC 61557-12, they improve the efficiency of the electrical system and guarantee the reliability of all electrical parameters and power quality indicators.
EuroSMC introduces the Quasar 3C, an optional accessory that enhances the capabilities of the existing Quasar unit by adding three additional current channels.
Despite its compact and lightweight design, the new Quasar 3C offers significant functionality, connecting via the digital interface and LL-Outputs ports. When used with the Quasar, it provides four voltage outputs and six current outputs, which can be expanded to ten current outputs.
LEM will use PCIM 2023 to present its new DC energy meter for electric vehicle (EV) DC chargers to the global electromobility market. The DCBM 100 meter complies with the latest metrology standards and will be marketed in the EU during the third quarter of this year.
Keysight presents a comprehensive emulation solution that identifies the impact of variables affecting battery drain in Internet of Things (IoT) devices so that development engineers can improve the design of their devices.
Fluke has introduced the Fluke 5560A high-performance multi-product calibrator, which allows for a wider range of electrical tasks with maximum accuracy.
Addressing the demand in the high-end multi-product calibrator market, the 5560A builds upon Fluke's existing product line, including the 5730A high-precision multifunction calibrator, designed for calibrating digital multimeters with 8.5-digit resolution. The 5560A is a solution for calibrating digital multimeters with up to 6.5 digits.
Yokogawa Test & Measurement Corporation announces the launch of its second generation of split-core AC/DC current sensors, the CT500SA and CT200SA. Designed for space-constrained environments, such as xEV vehicle testing, they offer high-precision current measurements in...
High-voltage batteries for electric mobility have become highly complex systems made up of numerous components. The market for these batteries is increasingly dynamic, and the technologies are constantly evolving: innovative battery cells are being introduced with...
The CMU DC current monitoring system detects system loads and provides early warning of faults. The display is shown directly on the equipment's optical display or via a remote signal. At only 8 mm wide, the current measuring unit not only saves space in the control cabinet, but also...
Danisense introduces its MK500ID, its first high-precision AC and DC clamp meter designed for galvanically isolated measurements up to 500 A rms.
The MK500ID clamp meter offers exceptional performance, including...
GS Yuasa will present its new Traction Mind Battery Monitoring System (TM-BMS) at LogiMAT 2026, positioning the launch as one of the highlights of its presence at Europe's leading intralogistics trade fair, which will take place from March 24-26, 2026 at Messe Ferroviário.
OMICRON is pleased to announce the launch of the CPX 200, its new multifunctional, modular, and compact test equipment, developed to meet the engineering requirements of current and future electrical systems. This device represents a technological leap forward in terms of...
LEM presents a series of direct current (DC) meters. With the introduction of the DCES600 and DCES1500, LEM empowers DC charging infrastructure manufacturers to accelerate the time to market for fast-charging and megawatt-hour solutions by offering billing services in...
ABB's D1M analyzers feature DIN rail mounting, offering a scalable solution to adapt to various monitoring needs:
- By meeting the precision standards set in IEC 61557-12, they improve the efficiency of the electrical system and guarantee...
EuroSMC introduces the Quasar 3C, an optional accessory that enhances the capabilities of the existing Quasar unit by adding three additional current channels.
Despite its compact and lightweight design, the new Quasar 3C offers significant functionality, connecting via...
You will receive all 10 editions that are published each year.
Spanish electronics magazine. Printed for over 25 years.
Spain - Madrid - All rights reserved © Convertronic Professional Spanish Electronics Magazine.