Traditional silicon-based MOSFETs and IGBTs, which have been continuously developed and improved over the years, demonstrate their limitations in power applications requiring higher switching frequencies, greater heat dissipation capacity, and reduced weight and size.
Silicon carbide (SiC) is a broadband semiconductor that overcomes the limitations of Si technology by operating at higher voltages, frequencies, and temperatures without damage. More than 10 years after its introduction to the market, SiC has achieved a level of maturity and reliability that allows its use in the most critical power applications, such as automotive, renewable energy, data centers, and aerospace.
Microchip
Technology, a leading semiconductor provider for embedded, intelligent, connected, and secure control solutions, offers the industry’s broadest and most flexible portfolio of Schottky barrier diodes (SBDs), MOSFETs, and configurable digital gate drivers in bare-die, discrete, and power module forms (Figure 1). Microchip can also customize power modules to meet specific customer application requirements.
With over two decades of experience in SiC design and development, Microchip’s SiC solutions deliver best-in-class performance, robustness, and reliability, enabling designers to reduce both development costs and time to market. Microchip also offers some of the industry’s best SiC lead times, made possible by a multi-source epi wafer procurement approach and dual SiC fabrication facilities, providing customers with security of supply.
The robustness of Microchip's SiC MOSFETs is enhanced by a precise design that ensures greater repetitive non-blocking inductive switching (UIS) capability, eliminating the need for a snubber to protect the SiC MOSFET from avalanche voltage surges. When the current through an inductor is abruptly interrupted, the magnetic field induces a back electromotive force (EMF) that can generate very high voltages across the MOSFET itself. Therefore, a high degree of robustness is essential for power devices, defined here as the ability to withstand the degradation of the SiC MOSFET when subjected to UIS; otherwise, additional components are needed to protect the SiC MOSFET from avalanche surges. In addition to offering UIS-resistant devices, Microchip's SiC MOSFETs provide IGBT-like short-circuit performance to safely handle unexpected system transients.
To meet the demands of power applications that utilize high switching frequencies and high operating voltages to increase efficiency and reduce the weight and size of the solution (such as electrified transportation, renewable energy, aerospace, and industrial applications), Microchip has recently introduced 3.3 kV SiC MOSFETs, featuring the industry's lowest RDS(on) (as low as 25 mΩ), and SiC SBDs, featuring the industry's highest current rating (90 A).
While 3.3 kV IGBTs are currently used in numerous applications, their switching speeds are limited, resulting in high switching losses and large system size. In contrast, using 3.3 kV SiC MOSFETs allows designers to reduce losses, size, and weight, as well as simplify multi-level systems into simple two-level designs. Both devices are available in die or package form.
SiC: Advantages and Applications
Compared to traditional Si power devices, such as MOSFETs and IGBTs, Microchip's SiC solutions offer the following key advantages:
- Higher junction temperature and better cooling; Lower RDS(on) and higher efficiency;
- 3x higher thermal conductivity, resulting in higher power density and higher current capacity;
- 2x higher electron saturation speed, resulting in faster switching and reduced size (in addition, the higher switching frequency allows the use of smaller magnets, transformers, filters, and passives, reducing the solution's footprint);
- Lower switching losses
; - 10x lower neutron susceptibility failure rate than comparable IGBTs at rated voltages;
- Extremely low stray inductance.
SiC devices can also be combined with other Microchip products, such as microcontrollers, power management integrated circuits, analog sensors, wireless transceivers, and touch and gesture controllers, to create complete solutions at reduced costs.
Typical markets and applications for Microchip SiC products include:
- Transportation: The high robustness and operating voltage of SiC devices are essential for creating efficient inverters and voltage converters, as well as protection devices, used in electric vehicles (cars, buses, trucks, trains, ships, eVTOLs, and airplanes) and charging infrastructure.
- Industrial: High switching frequency, low losses, and excellent thermal management make SiC devices ideal for applications such as motor control, switched-mode power supplies, UPS systems, soldering, and induction heating.
- Renewable Energy: SiC-based inverters can be used in photovoltaic applications and wind turbines to reduce power losses and increase efficiency.
- Medicine: Diagnostic equipment, such as MRI and X-ray machines, requires reliable, robust, and efficient power supplies.
- Aerospace and Defense: The properties of SiC allow power supplies based on this material to operate at high voltages and temperatures without damage. Microchip's SiC product portfolio includes the BL1, BL2, and BL3 families of baseless power modules, which have passed multiple validation tests in accordance with RTCA DO-160G and are already qualified for aerospace applications, including cargo and heavy-lift drones.
The comparison of how RDS(on) varies with temperature in Si and SiC is quite significant. In Si MOSFETs, the temperature dependence of RDS(on) (shown in Figure 2) does not vary with the device's rated voltage, since electron mobility in Si MOSFETs is dominated by thermal dispersion. In the temperature range between 25°C and 150°C, RDS(on) increases in a ratio of approximately 2.7 to 1.
Figure 2: RDS(on) versus temperature in the Si MOSFET
In Figure 3, however, we can observe the same type of curve for a 1200V SiC device from the Microchip family. In this case, within the temperature range of 25°C to 175°C, RDS(on) typically varies between 1.5 and 1.8. Therefore, compared to the previous curve, it is almost flat.
Figure 3: RDS(on) vs. temperature on a 1200V SiC device
Programmable Digital Gate Drivers
To address the critical challenges that can arise when working with SiC and IGBT power devices at higher switching frequencies, Microchip has designed the AgileSwitch® family of configurable digital gate drivers. Specifically, SiC MOSFETs must be controlled by properly adjusting gate control parameters. Otherwise, turn-off spikes, hum, electromagnetic interference, and DSAT could cause permanent damage to the device.
AgileSwitch drivers enable designers to control, monitor, and protect SiC-based applications with augmented switching technology, providing up to seven fault and protection notifications for safe and reliable operation. Microchip offers a complete line of module adapter boards and gate driver cores, along with its plug-and-play gate driver boards to address a wide range of SiC power modules.
Figure 4 shows an AgileSwitch SiC dual-channel gate driver core for 1200 V SiC modules. These gate driver cores, which incorporate Augmented Switching control technology, feature robust short-circuit protection and are fully configurable via software, including gate supply voltages of ±Vgs. Since SiC devices can withstand short circuits for a very short period (approximately 2–3 µs), it is essential to adopt appropriate short-circuit protection parameters for the gate driver.
Figure 4: Two-channel configurable digital gate driver core for 1200 V SiC
Unlike conventional analog gate drivers, these digital gate drivers can switch at up to 200 kHz and are fully software-configurable. They prevent false faults and mitigate hum, electromagnetic interference (EMI), overshoot, and undershoot in SiC and IGBT power modules. Connected to the module's adapter board, the digital gate driver core allows designers to quickly evaluate the module and gate driver, reducing time to market.
The gate driver shown in Figure 4 provides up to 10 A of peak current and includes an isolated DC/DC converter (with configurable output voltage) and a low-capacitance isolation barrier for PWM signals and fault feedback. The Intelligent Configuration Tool (ICT) is a GUI that allows users to quickly configure relevant gate driver parameters without having to change the hardware. Configurable functions include increased switching power on and off, ±Vgs gate voltages (positive Vgs from 15 V to 21 V, negative Vgs from -5 V to 0 V), power supply undervoltage and overvoltage lockout, desaturation detection settings, dead time, fault lockout, and reset settings.
Development Kits and Tools:
Microchip’s SiC product portfolio is supported by a broad selection of SPICE SiC models compatible with MPLAB® Mindi analog simulator modules and driver board reference designs. In addition, the Intelligent Configuration Tool (ICT) enables designers to set relevant SiC gate driver parameters for Microchip’s AgileSwitch family of configurable digital gate drivers. The ICT interface (see Figure 5) allows designers to configure various gate driver parameters, including gate switching profiles, critical system monitors, and driver interface settings. New devices can be characterized quickly and easily by changing driver settings in the lab or in the field without soldering. The result is a customized gate driver optimized to meet application requirements without any hardware changes. To further accelerate time to market, the ASDAK (without SiC module) and ASDAK+ (with SiC module) Accelerated Development Kits include the necessary hardware and software components to optimize the performance of SiC modules and power systems, and can save designers three to six months of development time on new designs.
Figure 5: Screenshot of the smart configuration tool
AUTHOR: By Perry Schugart, Technical Engineer - Product Marketing, Microchip Technology