The high edge definition of the conformal layer achieved through atomization maintains accuracy in confined areas and allows for the build-up of thin films, which is critical in the manufacturing and assembly of electronic boards used in mobile and automotive devices. The SC-350 is ideal for applications requiring precise edge definition and uniform passes for 100% solids and solvent-based coatings. An innovative airflow extension optimizes the atomization of high-viscosity materials such as silicones, acrylics, and urethanes, and reduces the "cobweb effect" that occurs when coating materials solidify during atomization. Viscosities ranging from 30 cps to over 3500 cps can be handled efficiently while reducing solvent usage. The SC-350 applicator is designed for use with the Nordson ASYMTEK SL-940 coating machine. The applicator can be attached to the tilting accessory (four positions). This means: the standard vertical position plus the applicator can be tilted up to 30 degrees in four positions, allowing for atomized application on all four sides of a part and in areas inaccessible from the standard vertical orientation. It also accommodates a configuration with two applicators operated simultaneously, reducing processing time by up to 50%. The SC-350 applicator is easy to clean and service, with minimal parts in contact with the fluid, smooth finishes, and unobstructed channels. Savings are achieved through minimal fluid and solvent usage, resulting in thinner coatings. By staying out of restricted areas, it saves on fluids, repairs, and touch-ups.

More information or a quote