The energy efficiency measure for refrigeration is the Energy Efficiency Ratio (EER), the ratio of cooling capacity to electrical energy consumed. Conventional chillers with hot gas bypass control systems have an EER of 1, while an EER of 3 is possible with the new Blue e+ chillers. The basis for this high level of energy efficiency is a variable-speed compressor. Instead of operating the cooling compressor at full capacity and wasting a large portion of the cooling power, as with hot gas bypass control systems, the inverter-controlled DC refrigeration compressor can provide precisely the required cooling output. This minimizes hysteresis without wasting cooling energy unnecessarily.
To drive the compressors, Rittal uses DC synchronous motors, which achieve greater efficiency than conventional AC asynchronous motors in most operating areas. An inverter, combined with DC radial fans and an electronic expansion valve, allows for highly precise speed control of these motors, meaning the Blue e+ chillers always operate at their optimal speed.
Another innovation Rittal is using in the new chillers is microchannel technology in the heat exchangers. The larger surface area relative to volume for heat exchange between the refrigerant and the cooling water allows for a reduction in the amount of refrigerant required by up to 55 percent.
The new chillers are available in three performance classes with cooling outputs of 2.5, 4, and 6 kW (adjustable between 20 and 100 percent). They are highly flexible and can be used in ambient temperatures from -5°C to 50°C. Several pre-configured option packages are available, for example, with a more powerful pump, a reversing pump, for outdoor use (down to -20°C), with oil cooling, with an integrated freestanding chiller (hybrid operation), or with an integrated heater to preset the medium temperature.
A touchscreen control panel displays all messages in plain text. The Blue e+ app, already used with Blue e+ chillers and communicating with units via NFC, is also compatible with Blue e+ chillers. This enables wireless transmission of important information. The RiDiag III parameterization and diagnostic software can also be used with Blue e+ chillers. This software can communicate with the chillers via USB and, in the future, will be able to do so via various network protocols using communication modules.
Certifications for all key markets, such as cULus Listed, EAC, CCC, and GS, make international use even easier.

