The new ALS2200 range is recommended for high-precision, high-volume manufacturing applications such as multi-axis laser micromachining, which typically demands very accurate speed and precise positioning. Throughout their entire range of motion, the tables maintain a flat, straight movement at the micron level. Because there is no bearing circulation and the table uses a linear servomotor, vibration is reduced to almost imperceptible levels, resulting in exceptionally stable speed.

 
With a width of less than 204 mm, the range offers 100 mm or 150 mm travel options with direct loads up to 30 kg, HALAR calibrated accuracy up to +/- 0.75 µm, bidirectional repeatability of +/- 0.2 µm, and speeds up to 500 mm/s. Positioning resolution is up to 3 nanometers with backlash zero.


The compact ALS2200 houses the linear servo motor, precision anti-slip bearings, and encoder for positioning, all integrated within the side seal system. The tensioned side strip and metal cover design has been successfully implemented across many generations of Aerotech tables and is preferred over bellows protection, which is problematic for maintenance and tends to increase the overall profile of the tabletop. The vertical side strips prevent debris buildup and, being under constant tension, maintain an effective seal. The end-mounted motor and power connectors allow for easy installation, and dual XY-axis tables can include pre-wired dynamic wiring. The robust aluminum construction is finished with a hard Teflon coating to prevent scratches, and the mounting holes are finished with steel for extended thread life.


Aerotech's direct-drive linear servomotors and contactless linear encoders are wear-free, ensuring exceptional reliability. Furthermore, the table boasts a long lifespan, offering an MTBF of 20,000 hours with minimal maintenance.
Aerotech provides a choice of digital PWM amplifiers for optimal acceleration and speed performance, or low-noise linear amplifiers for applications requiring extremely smooth and stable positioning.
Aerotech controls include Position Synchronized Outputs (PSO), which fully synchronize the position of multiple axes with the activation of a laser, camera, or real-time data acquisition.

More information or a quote