Electric vehicle recalls, while infrequent, have occurred in recent years due to risks related to thermal runaway. As expected, some of these fires have occurred during collisions or rapid charging, but somewhat unexpectedly, they have often happened while the vehicle is stationary and not undergoing any apparent operation. This highlights the unpredictability of these incidents.
Cell-by-cell batteries are gaining popularity due to their potential to improve energy density, reduce the number of parts, and lower costs. However, direct stacking of all cells carries a higher risk of thermal runaway propagation. At the cell level, with the transition to the cell-to-pack, the need to incorporate materials that can perform multiple functions is vital. The ideal candidate would be materials capable of providing thermal and electrical insulation, conformability, and even structure, while also being lightweight, thin, and low-cost.
Dr. James Edmondson, Director of Research, discusses options such as encapsulating foams to be inserted between cells or flame-resistant compression pads to protect pouch cells. These materials can help prevent the propagation of cell-to-cell thermal runaway within the pack.
Various materials can also be applied under the lid, on top of the modules, or on the exterior of the battery to provide additional protection beyond the cell level. Examples include ceramic blankets or mica sheets under the lid and various types of flame-retardant coatings on the casing.
Thermal management is another option for reducing the risk of fire. Active liquid and refrigerant cooling has already replaced air-cooled batteries to allow for greater control of battery temperature. Cold plates inside the battery are not common, but could future battery chemistries influence how heat is managed?
Battery Chemistry:
Switching from lithium-ion to sodium-ion batteries could be another solution to reduce the risk of fires. Although this type of battery still carries some risk, initial studies indicate a lower probability of thermal runaway. Their ability to be transported at 0 V also makes them less dangerous than lithium-ion batteries during transport and assembly.
Solid-state batteries could also replace the liquid electrolyte in traditional lithium-ion batteries with a better operating temperature range, meaning they are less likely to overheat.
The demand for batteries is greatest in the automotive sector, with countries like Norway having the largest market share of electric vehicles in the world. However, other modes of transport are also at risk. Electric buses, which operate for long periods and require larger batteries, could be even more critical to protect, given the large number of passengers they carry throughout the day. In Asia, electric scooters are a very popular mode of transport and are often kept indoors, making fire protection essential.
Although gasoline and diesel cars are more likely to catch fire, the rapidly growing electric vehicle market still presents some risks. IDTechEx has compared various fire protection material options in terms of application effectiveness, thermal and electrical insulation, cost, and other factors. The report also provides market share data for current materials and their projected adoption. The growing popularity of this topic has led to increasing interest from companies. While commonly used materials will remain a mainstay, their market share is expected to be somewhat diminished by emerging alternatives such as aerogels and compression pads.
