Programming is quick and easy using the built-in pushbuttons. It requires no connection to computers or other external programming devices. In just a few minutes, the I-303 can be configured as one type of timer or another, perfectly tailored to the exact timing requirements.
Its operation is based on a connection and disconnection time, both programmable between 0.1 seconds and 11,930 hours (497 days), with an accuracy of 0.1 seconds.
Programming also allows the selection and conversion of the module into a cyclic timer, a delayed timer, a delayed and cyclic timer, activated by a push button or by power supply, resettable in both cycles, in only one cycle, retriggerable, resettable, etc. A total of 16 different operating modes are available.
Despite its features and versatility, the Cebek I-303 is priced similarly to simpler models with fixed functions or less accurate timers from other brands, making it a highly competitive piece of equipment.
The connection and disconnection times occur on the closing or opening of the built-in double contact relay, which supports a maximum load of 230 V and 3 A.
It is powered interchangeably by 12 VDC or 24 VDC, with a maximum consumption of 65 mA.
It weighs 60 g and measures 87 x 72 x 26 mm. It is compatible with DIN rail guides using the corresponding socket provided by Cebek.
It has LED indicators for power, connection, activation, programming, etc.
