They accept LED strips, incandescent bulbs and other 12VDC resistive loads except for LED bulbs.
The Cebek R-41 and R-43 can be configured for night or day mode, automatically regulating the output with a gradual transition from dark to light or from light to dark, and with permanent on or off upon completion of the transition.
They support an adjustable day/night transition setting.
The R-41 supports loads up to a maximum of 4 A.
The R-43 supports loads up to a maximum of 8 A.
The Cebek R-45 incorporates two independent outputs: a main output for the four phases of the day (sunrise, day, sunset, night) and an auxiliary tracking output. The main output automatically regulates the transitions from off to on, on, off, and off. The auxiliary output can be configured to activate during either the on or off phase of the main output.
The Cebek R-46 incorporates four independent outputs, performing the same functions as the R-45 but with twice the number of outputs. Two main outputs control the four phases of the day, operating in reverse, similar to a fader. The two auxiliary outputs are active; one only during the fixed on phase and the other only during the fixed off phase.
Both the R-45 and R-46 maintain automatic and continuous operation at the outputs, automatically restarting the process upon reaching the end of a cycle.
Both circuits allow independent adjustments for on-off and off-off transitions, as well as for fixed on/off periods, both adjustable between 1 second and 2 hours.
They incorporate selectable start-up for any of the four phases of the day and support loads up to a maximum of 4 A.
Cebek's full range of Day-Night effect regulators is mainly used in professional nativity scenes, farms and autonomous lighting systems.
