that supports the simultaneous operation of protocols based on Bluetooth® Low Energy (BLE) v4.2 and IEEE® 802.15.4 technology for automation, home networking and healthcare applications.
The NXP Kinetis KW41Z/31Z/21Z wireless microcontrollers, available from Mouser Electronics, comprise three microcontrollers: the Kinetis KW21Z supports 802.15.4-based networks such as Thread; the Kinetis KW31Z supports BLE v4.2 and Generic FSK networks; and the Kinetis KW41Z supports BLE v4.2, Generic FSK, and 802.15.4 running simultaneously. Built on an ARM® Cortex®-M0+ core, with up to 512 KB of flash and up to 128 KB of SRAM, the connectivity, security, and analog capabilities of these highly integrated, low-power microcontrollers make them ideal for battery-powered portable applications. The microcontrollers also incorporate a high-performance DC-DC converter to support a wide operating voltage range from 0.9V to 4.2V, significantly reducing peak current in both receive and transmit modes. At the same time, the family offers an excellent link budget, ensuring maximum communication range and high interference immunity. The radio frequency (RF) section of the microcontrollers is optimized to require very few external components, resulting in a small RF footprint on the board.
The Kinetis KW41Z/31Z/21Z microcontrollers are supported by two development tools, also available from Mouser. The FRDM-KW41Z Freedom Development Kit includes two boards that allow engineers to evaluate wireless applications on the Kinetis KW41Z microcontroller. The kit includes everything needed to quickly establish a wireless connection between the two boards, including F-type inverted PCB antennas and an SMA RF connector. The boards support DC-DC bypass, boost, and bypass configurations and can be configured as a host or shield for connection to a host processor. The USB-KW41Z Wireless Packet Sniffer is a USB dongle that engineers can use to monitor wireless communication packets on the target network. The dongle easily connects to a PC after installing the required monitoring software. Alternatively, engineers can use the USB dongle as a wireless node with easy connection to a PC or other USB-enabled device.

