RSS feed
- Details
- Category: Other products
After launching the first KNX-20E power supply with KNX technology in 2017, MEAN WELL and OLFER Electronics are committed to continuing to promote and announce devices with this KNX building automation control protocol, complying with international standards.
- Details
- Category: Batteries
A few months after launching the NPB-450/750/1200 series of smart universal chargers with an ultra-wide range of 450W/750W/1200W, MEAN WELL and OLFER Electronics present the newest model in the family, the 1700W NPB-1700. These offer smart chargers with a wide voltage range and a versatile design, along with high safety and durability.
- Details
- Category: Electromechanical
CUI Devices' switching division has announced the addition of IP67-rated models to its line oftouch switches. The TS03, TS05, TS08, and TS19 series, ideal for applications exposed to moisture and environmental contaminants, offer industry-leading lead times, compact dimensions of just 3 x 2 x 0.6 mm, and a lifespan of up to 300,000 cycles.
- Details
- Category: Microcontrollers
Security threats are becoming increasingly complex and creating challenges for product development in markets such as the Internet of Things (IoT), consumer electronics, industry, and healthcare, among others. It is essential that these products incorporate robust security and offer low power consumption to extend battery life. Microchip Technology Inc. introduces the first microcontroller on the market to combine a secure subsystem and Arm® TrustZone® technology in a single package.
- Details
- Category: Embedded Systems
MikroElektronika (MIKROE) has launched UNI-DS v8, a universal development board ideal for rapid prototyping, which includes everything engineers could need for their new project. It is equipped with a range of global standard functions and interfaces that enable the creation of complex projects quickly, efficiently, and elegantly.
- Details
- Category: Integrated Circuits
Power Integrations has announced an expanded offering of its InnoSwitch™4-CZ family of high-frequency, zero-voltage switching (ZVS) flyback controller ICs. When combined with Power Integrations' ClampZero™ active clamp IC and, optionally, the recently announced GaN-based HiperPFS™-5 power factor corrector, the new ICs easily address the latest USB PD 3.1 specification for adapters and chargers up to 220W.
- Details
- Category: Converters
Mecter introduces Mornsun's new compact and highly reliable LD90-23BxxR2 AC/DC converter to expand the power range of the "305RAC" family. It meets the "305RAC" family's characteristics of ultra-thin size, high performance, high efficiency, and a wide input voltage range of 80-305VAC.
- Details
- Category: Integrated Circuits
Mecter introduces the SCM3406ASA, a low-power, half-duplex transceiver that fully complies with the TIA/EIA-485A standard. Powered by a 3-5.5VDC source, it features ESD bus protection up to 15 kV HBM and a fault-tolerant bus voltage range of -15V to +15V.
- Details
- Category: Converters
New energy vehicles and the photovoltaic industry are constantly expanding the range of applications and requirements for semiconductor devices, including the key component of semiconductor devices in electric vehicle charging systems and SVG photovoltaic systems - IGBT/SiC MOSFET, which also has higher requirements for driving solutions.
- Details
- Category: Power Supplies
Mecter introduces the new Mornsun LMF350-23BxxUH series. This is a sealed, fanless AC/DC power supply suitable for industrial and outdoor applications in harsh environments. It features a universal AC input voltage range, accepting either AC or DC input, and offers cost-effectiveness, high power factor, high efficiency, high reliability, and safety isolation.
- Details
- Category: Converters
Mecter introduces a new power range based on Mornsun's 5W series and the LS10-26BxxR3 series of 10W ultra-wide input voltage SIP AC/DC converters.
It features an input voltage range of 85-528VAC, a wide operating temperature range of -40℃ to +85℃, and an ultra-small size, allowing for flexible use with suitable peripheral circuitry, making it a cost-effective, low-power, single-unit power solution.
- Details
- Category: Current Affairs
Conflux and GKN Additive have announced a collaboration on the development, design, and production of 3D-printed heat exchanger solutions across Europe. 3D-printed heat exchangers have proven effective in improving the cooling of critical components in the electronics, automotive, and aerospace industries.
Spanish electronics magazine. Printed for over 25 years.
Spain - Madrid - All rights reserved © Convertronic Professional Spanish Electronics Magazine.