Parker Chomerics provides advanced solutions for thermal management and signal integrity, supporting electronic systems in the aerospace, transportation, telecommunications, and automotive sectors.
THERM-A-GAP® GEL 75 from Parker Chomerics, now available from Mouser, is a high-performance, one-component, dispenseable thermal interface material with a thermal conductivity of 7.5 watts per meter Kelvin (W/m K). It is designed to efficiently transfer heat from electronic components to a heatsink or housing. The material has a thick, paste-like consistency, allowing for precise dispensing and application in varying thicknesses to meet specific requirements. It requires minimal compressive force to conform during assembly, reducing stress on components, solder joints, and terminals. THERM-A-GAP GEL 75 requires secondary curing, making it ideal for automated dispensing machines and field repair applications.
The THERM-A-GAP PAD® 60 is a high-performance gap-filling pad with a thermal conductivity of 6.0 W/m K. It is designed to provide efficient heat transfer while maintaining low compressive forces and good conformability between contact surfaces. The THERM-A-GAP PAD 60 combines high thermal conductivity with excellent conformability and very low gas emission, creating a reliable thermal interface between heat sinks and electronic components, even in applications with irregular surfaces, air gaps, or rough textures. The "A" variant of these gap-filling pads features an aluminum foil backing with pressure-sensitive adhesive (PSA) for permanent bonding.
For applications and industries requiring only a moderate level of thermal performance in electronic device designs, Parker Chomerics offers the THERM-A-GAP® PAD 30. These gap-filling pads offer a thermal conductivity of 3.2 W/m·K, along with a low Shore 00 hardness of 30, allowing them to maintain conformability on irregular contact surfaces, in air gaps, or where rough surface texture is a concern. The THERM-A-GAP PAD 30 series also includes an "A" variant with an aluminum foil backing and pressure-sensitive adhesive for permanent bonding.
SOFT-SHIELD® 3500 fabric-on-foam (FoF) EMI shielding gaskets are designed as low-compression solutions for indoor use. Supplied in strips, SOFT-SHIELD 3500 gaskets are ideal for both EMI shielding and electrical grounding in applications involving shear and compression. These gaskets are available in adhesive-backed or non-adhesive strips in a variety of profiles/cross-sections, including rectangular, C-fold, D-shape, P-shape, knife-edge, and stealth. By combining the conductivity of a metallized fabric with the flexibility of a foam core, SOFT-SHIELD 3500 gaskets deliver reliable shielding performance and maintain durability throughout the equipment's lifespan.
