The LCM-40/60BLE is a 40/60W constant current driver for LED lighting with CASAMBI Bluetooth Low Energy wireless control. The CASAMBI system creates an intelligent network, allowing for easy configuration of all types of scenes and events, as well as the integration of sensors and pushbuttons for simple and intuitive professional lighting, without the need for cables or a single point of failure.
The LCM-40/60ble allows you to configure the output current using micro-switches between 350mA and 1050mA. It has an input range of 180-295Vac and a high efficiency of 90%, as well as a wide operating temperature range from -40ºC to +90ºC. It also features a push-button input that can be configured to control the LCM-40/60BLE itself or any group or scene on your CASAMBI network. With a plastic housing designed for LED lighting applications, it is suitable for indoor lighting, modern and smart buildings, or renovated homes where rewiring is unnecessary, stairwells (with two push-buttons on the same switch), and outdoor applications. It offers low ripple current and flicker-free operation.
Input for temperature protection of LED modules. The driver has an input for connecting an NTC sensor (negative temperature coefficient resistor) that allows us to reduce the output current in case of overheating in the LED modules. If we are not going to use this protection input, we can use it to connect a fixed resistor and adjust the output current to intermediate lower values up to 56% lower than the value selected with the DIP switches.
Characteristics:
• Input range 180-295V AC
• Wireless control with CASAMBI
• Pushbutton with configurable function in the App
• Class II without grounding
• Functions: pushbutton for dimming, scene control, groups
• Synchronization of up to 10 units
• Low ripple current, flicker-free
• 3-year warranty
