This Sunricher radio frequency system, distributed by Olfer, allows for quick, easy, and cost-effective installations to control the color and brightness levels in different areas. This system also incorporates various pre-programmed color-changing modes, enabling us to create spectacular atmospheres for a wide range of installations.
With this system, we can control up to 10 RGBW zones independently. This doesn't mean we can only control 10 points, but rather that we can establish a maximum of 10 independently controlled RGBW zones. If we need multiple points within a zone, we can control them simultaneously by assigning the same zone number to all receivers in that zone or by using repeaters.
A typical installation will consist of an SR-2806B2 transmitter and one or more receivers of the following models: SR-1003RC, SR-1003RCEA, SR-1012RC, SR-1022RC, or SR-1003RCDMX. It's important to remember that each receiver must be powered by a constant voltage power supply of 12 or 24 Vdc, depending on the operating voltage of your LED strips, or a higher voltage, within the acceptable range, if your LEDs operate at constant current.
Another advantage is the system's easy configuration and versatility. With our wide range of receivers, we can control everything from 12 or 24Vdc LED strips to light points operating on constant current at 350mA or 700mA.
Simply press the learning button on the receiver, a zone button on the remote, and turn your finger on the color selection wheel to assign a zone to your receiver.
SR-2806B2 Features:
- Radio frequency remote control.
- Operation in RGB or RGBW (or RGBY, RGBA) mode
. Allows independent control of 10 zones.
- Color changes in all 10 zones can be synchronized.
- High-sensitivity color wheel for quick color selection.
- 10 pre-programmed color-changing scene modes.
- Programmable transition time with 8 levels from 4 to 256 seconds.
- Typical range exceeding 20 meters.
- Independent brightness adjustment for each color.
- Ability to combine up to 100 million different colors.
- Option to use signal repeaters to expand functionality indefinitely.
Receiver Features:
- Radio frequency receivers.
- Different models available in constant voltage or constant current. Multiple receivers can be mixed in the same installation.
- Model SR-1003RCDMX with an additional DMX broadcast output for controlling other DMX-enabled equipment.
- Easy on/off switching and adjustment of color and brightness for each zone.
- Independent brightness adjustment for each color, offering a wide range of colors.
- Smooth, flicker-free dimming for greater eye comfort.
- Configurable transition time with 8 levels from 4 seconds to 256 seconds.
- The same zone number can be assigned to multiple receivers.
- Signal repeaters can be used to expand functionality indefinitely.
- Multiple receivers can be used with the same zone to control a greater number of light points or LED strips.
- Ultra-slim design for easy installation.
- Easy setup and programming.
- Easy connection.
- Operating temperature range from -20ºC to +50ºC
- Maximum case temperature 75ºC
