One of the biggest challenges in Spain is soldering, as many guardians, whether parents or teachers, don't want to endanger young students and prefer they don't touch a soldering iron, fearing burns or the possibility of setting fire to the classroom or laboratory with a simple oversight. However, in other countries like Germany, Japan, and Korea, students start soldering at a young age and are encouraged to be responsible and careful with soldering equipment. But reality often clashes with our wishes, and for this reason, Cebek has launched this SOLDER-FREE range so that young students don't have to solder wires but can still practice with motors, LEDs, and low-voltage solar cells without fear of burns. The kits
come with pre-soldered wires and connectors—it couldn't be easier. Supervision by monitors or tutors who can guide students in these technological activities is still recommended.
Model C-4060
is the same Cebek C-6059 solar motor with soldered cable and connector, which starts with only 0.3V and 25 milliamps.
Model C-4061
is the same Cebek C-6040 motor with soldered cable and connector, which supports starting from 1.5 to 4.5 Volts and requires 0.38 Amps.
Model C-4062
is the same Cebek C-0137 solar cell or panel with soldered cable and connector, 1.5Vcc and 75 milliamps
Model C-4063
It is the same Cebek C-0139 solar cell or panel with soldered cable and connector, 1.5Vcc and 170 milliamps.
Model C-4064
is a pack of 4 red 5mm LEDs with soldered cable and connector.
Simply connect any of these LEDs to its solar panel (male to female connector), place it in the sun, and the LED will light up. Move it away from the sun, and the LED will turn off.
The same will happen with the two small motors: if you connect them to their solar panel, they will rotate in the sun, and if you move the panels away from the sun, the motors will stop rotating. Visual, practical, simple, and educational. It's that easy.
