The M463 is also ideal for gaming applications. It supports numerous popular real-time operating systems (RTOS) and GUI libraries, and provides sample code for various use cases.

Although the M463 and M467 share many features, including an Arm Cortex-M4F, both chips have special characteristics that make them suitable for specific purposes. The M463 emphasizes CAN FD (Controller Area Network Flexible Data-Rate) applications for sensor data and control, while the M467 offers greater on-chip support for network communication and robust hardware cryptography requirements.

NuMicro M463

The NuMicro® M463 CAN FD/USB HS series of 32-bit microcontrollers is based on the Arm Cortex-M4F core, with a DSP instruction set and a single-precision floating-point unit (FPU). It offers up to 256 KB of Flash memory and up to 128 KB of SRAM, including hardware parity checking.

The chip supports multiple digital and analog peripherals, including 2 CAN FD buses to reduce bill of materials costs, high-speed USB OTG, up to 24 channels of 16-bit PWM, UART, SPI/I2S, Quad-SPI, I²C, analog comparators, and up to 16 channels of 12-bit SAR ADC.

The M463 core operates at up to 200 MHz, with a versatile operating voltage of 1.7 V to 3.6 V and a wide operating temperature range of -40 °C to 125 °C. Active current consumption is 135 μA/MHz at 25 °C/3.3 V (with peripherals disabled). It incorporates multiple low-power modes and energy-saving features, including the activation of several external inputs.

NuMicro M467

The NuMicro® M467 Ethernet/Crypto series is a 32-bit microcontroller based on the Arm Cortex-M4F core, featuring a DSP instruction set, a single-precision floating-point unit (FPU), and 10/100 MAC Ethernet support. It provides up to 1024 KB of flash memory in a dual-bank configuration and supports over-the-air firmware updates (FOTA), as well as up to 512 KB of SRAM with hardware parity checking. This chip offers a wide range of analog peripherals, including four analog comparators, three 12-bit SAR ADCs (up to 28 channels), and two 12-bit DAC channels.

The M467 Ethernet/Crypto series supports a wide range of peripherals, including Ethernet 10/100 MAC, hardware cryptographic engine, hardware key storage, real random number generator (TRNG), programmable audio PLL, 4 CAN FD buses, USB HS OTG, USB FS OTG, up to 24 channels of 16-bit PWM, 10 UARTs, 4 SPI/I2S interfaces, 2 Quad-SPI, 5 I²C buses, and 4 quadrature encoder interfaces (QEI).

The M467 series operates at speeds up to 200 MHz, with a wide operating voltage range of 1.7 V to 3.6 V and an operating temperature range of -40 °C to 105 °C. During operation, the chip consumes only 175 μA/MHz at 25 °C/3.3 V with peripherals disabled. It incorporates numerous low-power modes and energy-saving features, such as enabling various external inputs, including EMAC (Ethernet Media Access Controller).

Essential built-in security features in both microcontrollers include Execution-Only Memory (XOM) to protect sensitive code from copying; hardware secure boot; hardware key storage; hardware AES-256 cryptographic acceleration; and both a Pseudo Random Number Generator (PRNG) and a True Random Number Generator (TRNG). The M467 series adds a much broader range of hardware cryptographic acceleration: in addition to AES-256, it provides ECC-571, SHA-512, HMAC-512, RSA-4096, and SM2 acceleration.

These Nuvoton microcontrollers are available in a wide variety of LQFP and QFN package sizes, the size of which depends primarily on the number of dedicated I/O pins (from 48 to 128 pins for the M463 and from 64 to 176 pins for the M467). Variants with an exposed thermal pad (EPAD) are also available for specific cooling requirements. Therefore, users can choose the most suitable package variant for their design or even scale it up or down with minimal effort. Aside from the number of I/O pins and dimensions, almost all other characteristics are identical across all package variants.

Nuvoton provides the NuMaker-M467HJ evaluation board for the M467, the NuMaker-M463KG evaluation board for the M463, and the Nuvoton Nu-Link debugger. Third-party IDE support for both products includes Keil MDK, IAR EWARM, and Eclipse IDE with GNU GCC compilers. These tools provide a simple and consistent development environment for both products, based on well-known, industry-standard software, thus reducing development time.

These products are compatible with real-time operating systems (RTOS) such as Mbed OS, Amazon FreeRTOS, and Zephyr. Supported GUI libraries include emWin and LVGL.
Sample code includes TinyML applications such as keyword detection, license plate recognition, image classification, visual word detection (person detection), and gesture detection. Sample code is also available for an electric bicycle dashboard HMI/GUI in emWin Appwizard and for uploading data to the internet/cloud via TLS.

More information on the NuMicro M463 and M467