Thanks to this new agreement, Mouser will make iC-Haus solutions available to its customers, giving engineers better tools for applications such as motion control and detection in industrial environments, feedback and positioning systems, laser measurements, and electronic systems for the healthcare and automotive sectors.
The iC-PZ2656 high-resolution reflective absolute encoder , available from Mouser.com, is a complete, lensless, optical reflective absolute encoder integrated circuit. It features an integrated interpolator and blue LED, providing a high-resolution, single-chip absolute, linear, or rotary encoder solution. Its independently configurable outputs (BiSS/SSI, ABZ, UVW, SPI, and analog Sine/Cosine) can be used individually or in combination, making it a highly flexible system. FlexCount® and FlexCode® technologies allow for arbitrary ABZ resolution and code disk diameter.
The iC-TW29 provides a comprehensive solution for single-turn and multi-turn encoders with arbitrary resolution. Independent I/O modules offer BiSS C, ABZ, or UVW outputs, either independently or in combination. The device converts 1 to 4096 input cycles per revolution into a freely scalable output angle of up to 26 bits. Automatic signal error correction ensures minimal angular error and jitter. It also allows for compensation of eccentricity in magnetic poles or off-center optical disks.
The iC-HD7 quad differential line controller is a robust, four-channel device optimized for 5V and 24V industrial applications. It features current-limiting outputs and short-circuit protection, as well as a low saturation voltage, ensuring stable signal transmission and making it ideal for precise and reliable industrial control, sensor systems, and encoder applications.
The MB5U high-performance BiSS (SSI) to PC adapter is a USB adapter designed for easy evaluation of iC-Haus integrated circuits using the corresponding GUI software and evaluation board. The adapter provides galvanically isolated differential RS422 master interfaces for BiSS and SSI via a 9-pin D-sub connector. It enables equidistant data acquisition and can be used for sensor calibration. The iC-NZN N-type laser diode driver can be used to achieve precise, spike-free operation of these diodes in both continuous wave and pulsed modes. It features safety and current control characteristics to ensure reliability. With peak current control, optional adaptive current regulation, fast soft start-up, and integrated error outputs, the driver offers versatile, stable, and accurate operation for a wide range of laser diode configurations, including blue lasers.
