The ER-T-DALI-2 DT8 JQ-01A controller can function as a DALI Master when powered by AC, providing power to the DALI bus with a 50mA output and allowing control of up to 25 Control Gears.
Among the advantages of this device is the ability to actively connect up to four units to the same DALI bus, thus achieving a total current of 200mA for the DALI bus. In this case, the last unit to send a signal will be the one that controls the control.
It can also operate powered by the DALI bus, functioning as an Input Device, generating the necessary commands for a DALI Master to send the corresponding control commands to the bus.
The ER-T-DALI-2 DT8 JQ-01A allows you to turn it on and off, as well as adjust the brightness and color temperature, and its operation is very simple:
- Press the wheel for ON/OFF
- Turn to adjust the brightness and hold and turn to adjust the color temperature
- It allows you to set the minimum and maximum color temperature value and the minimum adjustment value.
FEATURES
• Integrated DALI power supply, AC powered
• Voltage range 198-264Vac or self-powered from DALI bus
• Input current (max) 8mA (in passive mode)
• Instance operation powered from DALI bus
• Interface: DALI-2 IEC62386-101,103,301,302
• DALI connection Max. 25 Control Gears DALI/ 50mA
• Adjustable brightness and color temperature
• Color temperature range 2,000-10,000K (configurable maximum ranges)
• Compliant with DALI parts 101, 103, 301 and 302
• Protection Class II
