With this system, we can control up to 5 lights independently. This doesn't mean we can only control 5 lights, but rather 5 zones. If we need several lights within a zone, we can control them simultaneously simply by assigning the same zone number to all the lights in that zone.
The range is typically over 20 meters. Keep in mind that solid objects, especially concrete walls, may reduce the range.
Another advantage is the system's easy setup and versatility. With our wide range of receivers, we can control both 12Vdc or 24Vdc LED strips and lights that operate on constant current at 350 or 700mA. Simply press the learning button on the receiver and a zone button on the remote (transmitter) to assign a zone.
Each receiver has two or four outputs (sharing the same zone number), allowing you to power multiple LED strips or light points simultaneously.
A typical installation consists of an SR-2801 transmitter and one or more SR-25xx series receivers.
Remember that each receiver must be powered by a constant voltage power supply, either 12 or 24 Vdc depending on the operating voltage of your LED strips, or a higher voltage within the LEDs' acceptable range if they operate at constant current.
The SR-2801 transmitter allows you to control up to five zones independently, with a typical range exceeding 20 meters.
SR-2801 Features:
• Radio frequency remote control.
• Allows independent control of 5 zones.
• Easy on/off and brightness adjustment for each zone.
• Typical range exceeding 20 meters.
• Long-life battery included, typically 5 years.
• 256 brightness levels with a logarithmic curve, adapted to the human eye.
• Smooth, flicker-free dimming for greater eye comfort.
• Dimming range from 0.1% to 100%.
• Signal repeaters can be used to expand functionality indefinitely.
Sunricher SR-25xx series receivers work in conjunction with the SR-2801 remote. They receive the radio frequency signal and decode it, generating a pulsed output. This PWM output allows control of the brightness level and energy consumption of the single-color lighting system.
These receivers must be powered by a constant voltage source of 12 or 24Vdc (depending on the required output voltage, it will be 12 or 24Vdc respectively, or, if the output is a constant current of 350mA or 700mA, it will be 12 or 24Vdc). A high-quality power supply with low noise and ripple is essential for the brightness control to function correctly. For this purpose, we recommend our LPF, LPV, or HLG series from MEANWELL Enterprise Co. LTD.
SR-25xx Features:
• Radio frequency receivers.
• Different models with 2 or 4 outputs in constant voltage or constant current. Different receivers can be mixed in the same installation.
• Easy on/off and brightness adjustment for each zone.
• 256 brightness levels with a logarithmic curve, adapted to the human eye.
• Smooth, flicker-free dimming for greater eye comfort.
• Dimming range from 0.1% to 100%
. • Signal repeaters can be used to expand functionality indefinitely.
• Multiple receivers can be used with the same zone to control a greater number of light points or LED strips.
• Ultra-slim design for easy installation.
• Easy configuration and programming.
• Operating temperature range from -20ºC to +50ºC.
• Maximum case temperature 75ºC.
