For these reasons, in today's saturated and highly unstable electrical environment, where supply voltage fluctuations are frequent, voltage stabilizers play a crucial role in ensuring stable voltage for loads most sensitive to these variations.
Salicru has enhanced the features of its RE range by incorporating an LCD display, communication options, and SICRES remote monitoring. Salicru's new RE3 series of electronic stabilizers, based on a completely static structure, stands out for its high efficiency of up to 97%, its response speed of less than 100ms, and its output accuracy of ±2%. They are available in single-phase or three-phase configurations and in a power range from 300 VA to 250 kVA. The three-phase units are designed with fully independent regulation per phase to prevent potential regulation problems due to load imbalances. Furthermore, the units incorporate a static bypass that guarantees supply in the event of a failure.
Its design incorporates eco-efficient factors, most notably the use of 80% recyclable materials in its composition, allowing for high component recovery at the end of its useful life.
Features:
o Power range, single-phase and three-phase, up to 250 kVA.
o Ultra-fast regulation: Response speed of less than 100 ms.
o Digital control and independent parameter programming per phase.
o Completely static structure, without moving parts, for greater reliability.
o Static bypass, loads always powered.
o In three-phase units, independent regulation per phase, immune to imbalances.
o Output accuracy better than ±2%.
o Input regulation margins of ±15%, standard.
o Efficiency greater than 97%.
o Isolating or ultra-isolation transformer at the unit's output.(1)
o LCD display standard on single-phase units from 6 kVA or three-phase units from 15 kVA.
o Standard detection of input or output voltage (max/min) outside of acceptable limits. (2)
o SICRES communication slot. (2)
o Over-temperature detection. (2)
o Does not introduce harmonics or alter the power factor of the installation.
o Immune to line voltage harmonics; stabilization based on true RMS value.
o Stable operation under load and/or voltage variations.
o High robustness and reliability (high MTBF).
o More than 80% recyclable materials.
Risks and costs of not installing an industrial UPS
Industrial environments have a number of specific requirements regarding their electricity supply. Its continuity, reliability, and efficiency are non-negotiable and must be achieved at a reasonable cost that contributes to the profitability of companies and organizations.
