Conventional three-level inverters exhibit low switching losses because the off-state voltage across the switching devices is half the line voltage. In comparison, two-level inverters have fewer switching modules, making them simpler, smaller, and lighter. However, they require semiconductor devices with higher breakdown voltages because the applied voltage is the line voltage. Overcoming this challenge is significant, as a two-level inverter based on the new device achieved higher frequency operation and lower power loss than a conventional three-level silicon (Si) IGBT inverter.
The new dual SiC MOSFET module (MG250YD2YMS3) has a rated VDSS of 2200 V and can handle a continuous drain current (ID) of 250 A, with 500 A in pulsed operation (IDP). The insulation (Visol) is rated at 4000 Vrms, and the device can operate at channel temperatures (Tch) up to 150°C.
It offers low conduction losses with a typical drain-source voltage (VDS(on)sense) of 0.7V. Switching losses are minimized with typical on- and off-off losses of 14mJ and 11mJ respectively, meaning lower thermal management requirements, resulting in smaller inverters.
In the MG250YD2YMS3, the impurity concentration and drift layer thickness have been optimized to maintain the same on-resistance (RDS(ON)) to breakdown voltage ratio as existing products. This also enhances cosmic ray immunity, a key requirement for photovoltaic systems. Furthermore, the SBD embedding with parasitic PN junctions locked between the p-base regions and the n-drift layer ensures reliability under reverse conduction conditions.
The switching power loss of the developed SiC module is significantly lower than that of equivalent silicon modules. For example, the new SiC module achieves twice the frequency of a conventional Si IGBT, and exhibits 37% lower power loss when comparing a two-level SiC inverter to a three-level Si inverter.
