The new board allows engineers to evaluate interfaces, validate applications, and develop prototypes before designing a specific carrier board for the final product. The OSM-SB-EP5 was presented at electronica 2026, held from November 10-13 in Munich, where Tria showcased its solutions in Hall B5, Stand 103.
The OSM-SB-EP5 is designed to facilitate the development of embedded systems from the early project stages through to production readiness. It is compatible with Tria's OSM modules in S, M, and L formats, allowing the use of a single platform to evaluate different hardware configurations and develop software. The OSM standard brings the advantages of Computer-On-Module (COM) and System-On-Module (SOM) architectures to more compact, high-volume devices, where traditional modules with connectors might be too large or expensive.
This architecture is suitable for applications in industrial IoT, edge AI, robotics, and embedded vision.
Gigabit Ethernet, CAN FD, MIPI CSI-2 and M.2 expansion interfaces
The platform incorporates different communication and expansion interfaces to assess the connectivity needs of each application. Its main features include:
Gigabit Ethernet for network communications.
USB for connecting peripherals.
CAN FD for industrial applications.
RS-485 for serial communications.
MIPI CSI-2 for camera connection.
Screen interfaces for applications with visualization.
M.2 slot for evaluating Wi-Fi, Bluetooth and cellular wireless connectivity.
This combination allows for the comparison of different communication technologies and the verification of system requirements without the need to develop a specific board beforehand.
Development of prototypes and customized carrier cards
The OSM-SB-EP5 can also be used as a hardware reference during the transition from initial evaluation to the design of a commercial product. Engineering teams can reuse already validated interface implementations and proven design concepts to develop custom carrier boards, reducing the work required to move from prototype to a ready-to-install system. According to Harald Maier, Product Marketing Manager at Tria Technologies, the platform is designed to accelerate the process from initial concept to final product.
The manager emphasizes that compatibility with Tria's three OSM formats facilitates hardware evaluation, application validation, proof-of-concept development, and software deployment on a common platform.
Applications in industrial IoT, robotics and Edge AI
The platform is geared towards manufacturers and equipment developers who need to integrate compact computing modules into industrial products. Its main applications include industrial IoT devices, embedded vision systems, robotics solutions, and equipment incorporating edge AI processing.
