Designed with a high-frequency topology, the TN/TS-3000 series is characterized by its light weight and up to 92% efficiency.
It can continuously deliver 3000W to all types of loads with low harmonic distortion.
The TS-3000 is an inverter that converts a DC input to an AC output. The TN-3000 series is not only functionally equivalent to the TS-3000 series, but also functions as an AC charger and a solar charger. It can charge external batteries via mains electricity or solar panels and convert the output to AC through its inverter stage. It can operate in energy-saving mode simply by adding external lead-acid batteries and solar panels. Equipped with two operating modes (UPS and energy-saving mode), the TN-3000 offers end users great flexibility in selecting the appropriate operating mode based on weather conditions and specific application requirements.
In "UPS Mode," the unit will remain in bypass mode (allowing input AC power to pass to the output) as long as there is a power supply (the normal operation of a UPS system). The batteries can supply power even when the inverter is off. In "Energy Saving Mode," when connected to the solar panels, the sun's "free energy" can be stored in the batteries as electricity. In conclusion, you can save on energy consumption and your electricity bill, aligning with the global trend toward energy conservation.
The TN/TS-3000 inverters are digitally controlled by microprocessors via the front panel or optional monitoring software, allowing you to check AC output voltage, frequency, energy-saving mode, and UPS mode (TN-3000 only).
These two inverters are equipped with comprehensive protections, including battery overvoltage protection, a low battery alarm, an internal fuse, battery reverse polarity protection, and an input DC circuit breaker for short circuits, overloads, and over-temperature. The output also features an AC circuit breaker and a GFCI (optional – for the F-type model).
The TS/TN-3000 series design complies with global safety standards and EMC certifications, making them suitable for powering all types of household appliances, power tools, and office and laptop equipment in vehicles, yachts, mobile homes, or other locations where reliable or high-quality power is unavailable.
The TN-3000 supports direct solar panel input as it incorporates a regulator.
Features:
• Sine wave output (THD < 3%)
• Peak output power up to 6000W
• Monitoring via software or the inverter's front panel of output voltage, frequency, standby mode settings, and energy saving mode.
• ON/OFF power switch and LED indicator for charging/battery/operating status
• Efficiency up to 92%
• Designed with AC charger and solar charger (TN-3000 only)
• Fast mode switching (Inverter mode
• With “UPS Mode” and “Energy Saving Mode” (TN-3000 only)
• Protections:
o Input – DC circuit interruption, overvoltage, low battery alarm, low battery shutdown, battery polarity
o Output – AC circuit interruption, short circuit, overload, over-temperature, GFCI (optional, type F)
• Designed with ON/OFF fan control function
• Monitoring software (optional)
• Optional remote controller (IRC series)
• Standards: E-mark, LVD (EN60950-1), UL458 (pending), CE, FCC
• Dimensions (LxWxH): 466.8 x 283.5 x 100 mm
• 3-year warranty
