- The TS-3000 is an inverter that converts a DC input to an AC output.
The TN-3000 is not only functionally equivalent to the TS-3000 series, but it also functions as an AC charger and a solar charger. It can charge external batteries via mains electricity or solar panels and convert the output to AC through its inverter stage. It can operate in energy-saving mode simply by adding external lead-acid batteries and solar panels. Equipped with two operating modes (UPS and energy-saving mode), the TN-3000 offers end users great flexibility in selecting the appropriate operating mode based on weather conditions and specific application requirements.
Furthermore, these two inverters are equipped with comprehensive protections, including battery overvoltage protection, a low battery alarm, an internal fuse, battery polarity reversal protection, and an input DC circuit breaker in case of short circuit, overload, and over-temperature. For output, they also feature an AC circuit breaker and a GFCI (optional for the F-type model).
The TS/TN-3000 series design complies with global safety standards and EMC certifications. They are suitable for powering all types of household appliances, power tools, office and laptop equipment, vehicles, yachts, mobile homes, or locations where mains electricity or adequate power quality is unavailable.
The TN/TS-3000 units are digitally controlled by microprocessors via the front panel or optional monitoring software, allowing for the verification of AC output voltage, frequency, energy-saving mode, and UPS mode (TN-3000 only). They also feature three other types of remote controls: IRC/1/2/3
The IRC1 is designed for the TS-700/1000/1500/3000 and TN-1500/3000 models. It features a remote control function and panel indicators to monitor the inverter's operating status, allowing you to turn it on and off and activate standby mode. The LED displays the inverter's ON/OFF status, any abnormal operation, and standby mode, providing the user with essential information about the inverter.
- IRC2 is designed for the TS-700/1000/1500/3000 models. This model features, in addition to the functions of IRC1, battery charge monitoring and the percentage of charge connected to the output.
The IRC3 display, fully equipped and designed for the TN-1500/3000 series, is an extension of the inverter's front panel. It includes all the functions of the IRC1/2 and also incorporates additional indicators for solar charging. It displays the charge percentage and AC input signal, indicates the output charge level and input voltage, and specifies whether the load is powered by the inverter or the grid. It allows the user to remotely control the solar inverter completely.
Meanwell is distributed by Electrónica Olfer.
