Therefore, these devices stand out for their carefully designed mounting system. The special geometry of the housing allows for virtually any cable exit point, thus optimizing wiring. The solid-shaft versions of the encoder feature multiple hole patterns simultaneously. This allows the same encoder to be used in different applications and enables easy switching between DBS36 and DBS50 without modifying external components, thanks to the universal connection system. The housing incorporates a servo nut, allowing for alternative mounting with servo clamps. The hollow-shaft version of this product range is also notable for its versatility: the standard diameter of the hollow shaft is 8 mm, but it can be reduced to 5 or 6 mm using the appropriate accessories. The design of the torque bracket has also been carefully considered. Thanks to the angled slots, the encoder can be mounted on a 42 mm or 46 mm hole pattern. Furthermore, the design of these encoders allows easy access to the shaft fixing screws, which greatly simplifies their assembly.
Although the DBS36 and DBS50 devices are designed for cost-conscious applications, they also boast high-quality optics. Thanks to their aluminum housing and flange, IP65 protection rating, larger mounting surface for enhanced shock and vibration resistance, and high radial and axial load capacity, these incremental encoders ensure maximum robustness. Speaking of increments: these encoders are available with a number of lines ranging from 100 to 2500.
