Semiconductors
- Details
- Category: Other Semiconductors
ROHM has expanded its range of low voltage (40V/60V) MOSFETs for automotive applications — such as main control circuits for inverters, electric pumps and LED headlights — with the introduction of new products that adopt the new HPLF5060 package (4.9 mm × 6.0 mm).
- Details
- Category: Other Semiconductors
Renesas Electronics Corporation has developed three System-on-Chip (SoC) technologies for multi-domain automotive electronic control units (ECUs). These incorporate advanced AI processing capabilities and chiplet functions, forming the core technology platform for next-generation electrical/electronic (E/E) architectures in the automotive industry.
- Details
- Category: Integrated Circuits
Toshiba Electronics Europe GmbH (“Toshiba”) has launched two sinusoidal wave pulse width modulation (PWM) drive controllers, the TC78B043FNG and TC78B043FTG, for three-phase brushless DC (BLDC) motors, which can support both surface permanent magnet (SPM) motors and inside permanent magnet (IPM) motors with low noise and high efficiency.
- Details
- Category: Semiconductors
Silanna Semiconductor has announced that its FirePower™ laser trigger system integrated circuits (ICs) for smaller, more efficient LiDAR and rangefinder applications are now available in production volumes.
These devices have been developed to significantly reduce power consumption, system size, bill of materials (BOM) cost, and design complexity compared to other laser driver technologies.
- Details
- Category: Integrated Circuits
Allegro MicroSystems, Inc. has introduced the ACS37017, a new Hall effect current sensor that sets a new industry standard for accuracy. With the launch of the ACS37017, Allegro completes an expansion of its high-performance portfolio, which now includes solutions for the three critical challenges of modern power electronics: Speed (ACS37100), Power Density (ACS37200), and Accuracy (ACS37017).
- Details
- Category: Other Semiconductors
Trelleborg Sealing Solutions introduces a new range of fluorinated surfactant-free gaskets designed to reduce environmental impact. As global regulators and semiconductor manufacturers increasingly focus on reducing perfluoroalkyl and polyfluoroalkyl substances (PFAS) due to their potential effects on human health and the environment, Trelleborg is launching three new Isolast® PureFab® materials: two perfluorinated elastomers (FFKM), JPF50 and JPF58, and one fluorinated elastomer (FKM), VPF20.
- Details
- Category: Other Semiconductors
The growing workloads of AI and high-performance computing demand power solutions that offer efficiency, reliability, and scalability. Integrated power modules help streamline design, reduce energy consumption, and deliver the performance required by advanced data centers.
- Details
- Category: Design
This article explains how to select the right controller for a PXI system, which is critical for the performance of demanding test and measurement systems. The PXI controller acts as the "brain" of the system, managing data, running software, and connecting the PXI modules to each other.
- Details
- Category: Microcontrollers
Microchip Technology introduces the PIC32CM PL10 microcontrollers to its PIC32C family of Arm® Cortex®-M0+ core devices. The PL10 microcontrollers incorporate a wide range of Core Independent Peripherals (CIPs), operate at 5V, offer touch capabilities, integrate various tools, and comply with safety standards.
- Details
- Category: Integrated Circuits
Toshiba Electronics Europe GmbH (“Toshiba”) has launched the TB67S579FTG, a next-generation stepper motor driver IC featuring Advanced Microstep technology. This two-phase bipolar stepper motor driver employs a constant current control method. Thanks to its advanced features, it achieves highly efficient motor operation with low vibration and low noise. Target applications include office equipment such as printers and scanners, as well as a wide range of commercial and industrial equipment, including surveillance cameras, projectors, ATMs, 3D printers, sewing machines, and many more.
The high-efficiency stepper motor driver is Toshiba's first product to incorporate the newly developed Advanced Microstep technology, which includes three key features: second-generation active gain control (AGC2), the newly developed Automatic Waveform Generation System (AWGS), and the recently developed Continuous Microstepping. Continuous Microstepping significantly reduces vibration and noise, especially during low-speed rotation, by creating a continuous, sinusoidal waveform of the motor's drive current.
Typical microstepping control methods require increasing the input clock frequency (CLK) in proportion to the number of microsteps. The Automatic Waveform Generation System (AWGS) is a feature that allows a stepper motor to be driven in microstepping mode using a single CLK signal, just as is required for full-step rotation control. Even in applications where a stepper motor is initially driven in full-step mode to quickly generate torque and then switches to microstepping to reduce vibration and noise, a smooth transition can be achieved without adjusting the control signals. As a result, the processing load on control devices, such as microcontrollers (MCUs), can be significantly reduced.
Typically, a stepper motor operates continuously at the maximum required current under full load conditions. Active Gain Control (AGC2) detects the induced voltage during motor operation to determine the load and automatically adjusts the motor's drive current accordingly. This mechanism allows the motor to operate at the minimum required current under light load conditions, resulting in increased efficiency and, consequently, lower power consumption. AGC2 also improves the current and torque waveform by performing full-step operation.
In addition to the conventional GPIO configuration interface, the TB67S579FTG offers a flexible serial configuration interface, allowing for easy adjustment of advanced features such as microstepping, AGC2, and decay modes without increasing the pin count or system complexity.
The TB67S579FTG's output stage (covering the upper and lower transistors) has an RDS(ON) of only 0.6 Ω (typical). In standby mode, the device draws a maximum current of 1 mA. To simplify system integration, the driver operates from a single motor power supply, ranging from 4.5 V to 34 V. The product also employs Toshiba's Advanced Current Sensing System (ACDS), eliminating the need for external current-sensing resistors. The integrated charge pump circuit does not require an external capacitor. Eliminating the need for these external components results in substantial space savings in the mounting area and reduces the bill of materials (BoM) cost.
Additional features include Advanced Dynamic Mixed Decay (ADMD) technology, which can achieve up to 30% higher rotational speeds without increasing noise and vibration. The controller's integrated circuit also implements comprehensive protection functions, such as overcurrent detection, thermal shutdown, undervoltage lockout, fault indicator output, and open load and blockage detection. The integrated blockage detection function reliably identifies motor blockage conditions, improving operational safety and preventing potential damage to mechanical and electronic components.
The TB67S579FTG is housed in a small VQFN48 package, measuring only 7.0 mm x 7.0 mm. Toshiba will continue to develop products for a wide range of applications, aiming to simplify user design, reduce board footprint, and offer complete solutions.
- Details
- Category: Integrated Circuits
Microchip Technology has once again expanded its maXTouch® M1 family of touchscreen controllers to deliver reliable and secure touch detection across an even wider range of automotive displays, now encompassing widescreen formats up to 42" to small displays from 2" to 5". The ATMXT3072M1-HC and ATMXT288M1 are designed to work with a variety of screen sizes.
- Details
- Category: Integrated Circuits
TouchNetix introduces the AX24A, a touch and force sensing controller designed for industrial, automotive, and entertainment applications. The device uniquely supports button functions as well as force sensing behind conductive surfaces. The AX24A offers state-of-the-art sensing capabilities in a compact 40-pin QFN package. Its advanced system allows for the management of up to 22 touch or force buttons, helping designers create intuitive and robust touch solutions.
Spanish electronics magazine. Printed for over 25 years.
Spain - Madrid - All rights reserved © Convertronic Professional Spanish Electronics Magazine.