Semiconductors
- Details
- Category: Microcontrollers
Renesas Electronics Corporation has introduced the RA6W1 dual-band Wi-Fi 6 wireless microcontroller (MCU), along with the RA6W2 MCU, which integrates Wi-Fi 6 and Bluetooth® Low Energy (LE) technologies. These connectivity devices address the growing demand for always-connected, ultra-low-power IoT equipment in smart home, industrial, medical, and consumer applications. Renesas also launched fully integrated modules that accelerate development thanks to built-in antennas, wireless protocol stacks, and pre-validated RF connectivity.
- Details
- Category: Integrated Circuits
Toshiba Electronics Europe GmbH (“Toshiba”) introduces the TCR5FM series of 35 LDO regulators, which help stabilize the DC power line for small devices such as smartphones and wearables. LDO regulators help address the challenge engineers face when designing battery-powered devices to switch from low-power mode to high-speed processing, thereby maximizing performance and battery life.
- Details
- Category: Integrated Circuits
Toshiba Electronics Europe GmbH (“Toshiba”) announces the shipment of commercial samples of its innovative door driver integrated circuit, the TB9084FTG, specifically designed for three-phase brushless DC (BLDC) motors. These motors are indispensable for a variety of essential onboard functions in diverse automotive applications, including body systems such as power sliding doors, power tailgates, and power seats, as well as electric pumps, fans, and motor generators.
- Details
- Category: Design
This is part 2 of a two-part series. Part 1 covered PCB design with high-precision 50 Ω transmission lines and minimizing impedance discontinuities at connector transitions to reduce return loss. Part 2 addresses isolation between transmission lines, how isolation affects beamformer IC performance, and how to choose the correct line topology for a given isolation requirement.
- Details
- Category: Design
This is the first part of a two-part series. Part one discusses PCB design with high-precision 50 Ω transmission lines and minimizing impedance discontinuities at connector transitions to reduce return loss. Part two will examine isolation between transmission lines, how isolation affects beamformer IC performance, and how to select the correct line topology for a given isolation requirement.
- Details
- Category: Other Semiconductors
ROHM has begun mass production of the SCT40xxDLL series of SiC MOSFETs in TOLL (TO-Leadless) packages. Compared to conventional TO-263-7L packages with equivalent rated voltages and on-resistance, these new packages offer approximately 39% improved thermal performance.
- Details
- Category: Integrated Circuits
Battery-powered devices and energy-constrained applications must control and monitor power consumption without wasting energy. To address this challenge, Microchip Technology today announced two digital power supervisors that consume half the power of similar solutions under typical operating conditions at 1024 samples per second.
- Details
- Category: Design
Part 2 of this series of articles analyzes examples of unusual or problematic Bode plots and their corresponding root causes. The previous article, "Understanding Power Supply Loop Stability and Compensation: Part 1: Basics and Tools," reviews the fundamental concepts and importance of loop stability, from the Nyquist plot criterion to Bode plots.
- Details
- Category: Integrated Circuits
Analog Devices, Inc. (ADI) announces the ADIN1300, a low-power, single-port Gigabit Ethernet transceiver with low latency and low power consumption specifications, designed for industrial Ethernet applications. This 10BASE-T1L Ethernet MAC-PHY device is designed to enable long-range, deterministic, and highly reliable Ethernet communications in demanding industrial applications.
- Details
- Category: Integrated Circuits
Mouser now offers the new RZ/G3E microprocessor (MPU) based on the Arm® Cortex®-A55 from Renesas Electronics. The RZ/G3E MPU is optimized for human-machine interface (HMI) systems that require edge computing and AI acceleration.
- Details
- Category: Other Semiconductors
ROHM has developed the RS7P200BM 100V power MOSFET with a single-stage offset (SOA) in a 5060 package (5.0 mm × 6.0 mm). This product is ideal for hot-swapping circuits in AI servers using 48V power supplies, as well as for industrial power supplies requiring battery protection.
- Details
- Category: Integrated Circuits
GigaDevice has announced the launch of its new generation of high-performance, dual-voltage xSPI NOR Flash products: the GD25NX series. Featuring a 1.8V core and a 1.2V I/O design, the GD25NX series connects directly to 1.2V systems-on-chip (SoCs) without the need for an external boost circuit.
Spanish electronics magazine. Printed for over 25 years.
Spain - Madrid - All rights reserved © Convertronic Professional Spanish Electronics Magazine.