As the market adjusts, emerging manufacturers and different ink materials will need validation, while various applications have specific requirements regarding ink properties.
IDTechEx has been providing market intelligence on printed electronics and conductive inks for nearly 15 years, reporting on the latest business and technological developments in this field. Their independent report, "Conductive Inks Market 2024-2034: Technologies, Applications, Players," includes detailed market forecasts for the next 10 years across eight different ink types and 15 application areas.
Ink technology
The conductive ink market is dominated by silver flake-based inks, which offer several advantages, including lower cost (primarily due to their simpler processing), compatibility with scalable printing technologies, and relative durability. While other ink types may boast higher conductivity, for many applications, printability and durability are the most important factors. The main drawback of silver flake-based inks is their vulnerability to volatile raw material costs. With fewer value-adding processing steps compared to other inks, raw material costs constitute a significant portion of the price of silver flake-based inks. Any increase in the cost of bulk silver will result in a larger percentage increase in the price of silver flake-based inks.
The recently announced tariffs on imports to the United States could have a drastic impact on the price of silver flake-based inks. Since 80% of the silver used in the United States is imported, primarily from Mexico, the effect of the trade tariffs will have a significant impact on the market. Not only will the price of raw materials be affected, but the uncertainty surrounding the long-term implementation of the tariffs must also be considered. At LOPEC 2025, several raw material suppliers to the conductive inks market informed IDTechEx that bulk silver is typically quoted at US$32 per troy ounce, with slight fluctuations of 15%, but that the tariffs could push the price of a troy ounce above US$40.
Alternative inks
IDTechEx was recently invited to participate in a meeting of IEC Technical Committee 119: Printed Electronics, where the various properties required for conductive inks in different applications were discussed. This participation helped define key terminology and develop a roadmap for standardization in this field. As alternatives to silver flake-based inks are developed, this topic is gaining increasing importance. Some of the most promising types of silver-free inks are copper inks and stretch/thermoformable inks. Copper inks offer lower prices, with a significant reduction in raw material costs, while stretch and thermoformable inks are platform technologies for non-compliant form factors across 3D and in-mold electronics.
The IDTechEx report provides coverage of the properties that must be considered for emerging technologies. Strong adhesion between the ink and substrate is required to ensure a high degree of robustness; however, reversible adhesion is also necessary for recycling at the end of the printed component's life cycle. Thermal durability is needed to allow the ink to cure at high temperatures or for thermal cycling in applications such as printed heaters. The coefficient of thermal expansion between the ink and substrate must also match to avoid unwanted stresses during temperature changes. Out-of-plane conductivity is necessary for the successful fabrication of fully additive 3D electronics, especially when considering vias between successive printed layers.
Author: Dr. Conor O'Brien, Senior Technology Analyst at IDTechEx
