RC Microelectronics presents this thin sheet that has both shock absorption and vibration damping capabilities from its represented company, Kitagawa.
RC Microelectronics presents this thin and flexible heat transfer plate for cooling hot spots from its represented Kitagawa.
RC Microelectronics presents this thin sheet that has both shock absorption and vibration damping capabilities. It is a silicone-free, siloxan gas-free material from their represented company, Kitagawa.
NTC inrush currents are used to limit inrush current in electronic circuits and prevent damage to components, blown fuses, or tripped circuit breakers.
High-efficiency condensing water boilers have largely replaced conventional water heating systems in Europe and are increasingly used in America and Asia.
The NKA series NTCs are designed for robustness and reliability in automotive and high-volume manufacturing applications. This series offers designers various standard options based on desired strength, bend, or coating. Custom designs are also available to meet specific electrical or mechanical requirements.
Amphenol Thermometrics UK Ltd, represented by RC Microelectronics, has developed a noise-immune NTC thermistor with an integrated RF decoupling function, providing EMI protection over a wide frequency range.
Kolbi announces the market launch of HeiCool ECO, a 1U plug-in cooling solution with energy savings of up to 79%. Developed by HEITEC, these units feature a high-strength aluminum casing for superior quality and a specially designed air outlet.
RS Components (RS), a trading brand of Electrocomponents plc, announces the availability of new, efficient fan controllers alongside the ebm papst 4300N series of fans.
The latest fan controller solutions are low-cost, credit card-sized devices.
Henkel presented its thermal management and printed circuit board assembly solutions for lithium-ion (Li-I) battery and powertrain applications at the Battery Show Europe in Hannover.
Thermoplastic compounds are highly valued for their lightness and exceptional strength. However, their widespread adoption has been hampered by shortcomings in existing production processes, which are slow, labor-intensive, and generate a lot of waste.
The Chemours Company (“Chemours”) presents its wide range of fluoropolymer and fluoroelastomer solutions for the wire and cable industry.
Same Sky® and its Thermal Management Group have announced the expansion of their thermoelectric generator (TEG) module product line. Harnessing the temperature difference between the hot and cold sides of the module to generate usable energy, the SPG family of generators...
SEKISUI presents TIMLIGHT, a new range of silicone-based thermal gap pads designed to optimize heat dissipation in power electronics applications and facilitate handling on the production line.
Parker Hannifin Corporation's Chomerics Division introduces its CHO-AIR® VITA 48.5 chassis gasket, an advanced airflow seal (AFT) that meets the mechanical and interface requirements of ANSI/VITA 48.5-2026. Designed for embedded computing architectures in applications...
SUNON's new 24V DC XG series fans have been developed for ESS systems, photovoltaic inverters, electric vehicle charging stations and UPS environments, where high thermal load and external influences are the norm.
The ambient operating temperature affects the heat generated by power supplies and end-equipment assemblies within a cabinet, which can cause them to exceed their operating temperature. Cooling the power supplies and subassemblies with equipment fans...
Tark Thermal Solutions announces the launch of the OptoTEC® MSX series of two- and three-stage multistage micro thermoelectric coolers (TECs), designed to deliver a high coefficient of performance (COP) for infrared sensors and X-ray detectors.
The OptoTEC® MSX series offers...
Würth Elektronik expands its product range and offers a complete portfolio of heat sinks, divided into three specialized product groups. The WE-HTO heat sinks are designed for THT-TO packages such as TO-220 and TO-247.
Thermocouples have an accuracy of ±1 °C, but you should be aware of the following potential drawbacks when using them to measure temperature:
They can pick up electrical noise.
They are relative (meaning they need to be calibrated with a "cold junction").
The thermocouple wires or...
Parker Hannifin's Chomerics Division announces the launch of its CHO-THERM™ HV series, a new line of thermal conduction interface pads offering enhanced levels of electrical insulation. This advanced range of materials combines high heat dissipation performance and...
You will receive all 10 editions that are published each year.
Spanish electronics magazine. Printed for over 25 years.
Spain - Madrid - All rights reserved © Convertronic Professional Spanish Electronics Magazine.