The new module offers high current conduction of 20A and a higher power capacity of 780W, at the lower end of its input voltage range with the ability to drive up to 1080W with a 54V input.
Compliant with the industry standard quarter-brick form factor, measuring 57.9 x 36.8 x 21.33 mm (2.28 x 1.45 x 0.84 in), the module has been optimized to simplify the design of blade server applications based on ATCA and PICMG 3.7 systems. The PIM4710PD is also well-suited for storage and server systems in any industrial, telecommunications, and data communications application that employs distributed power or intermediate voltage bus architectures.
The PIM4710PD incorporates innovative low-EMI design techniques to ensure that external filtering is kept to an absolute minimum, thus meeting the CISPR Class B EMC standards required for implementation in ICT systems. The module also offers excellent ripple and noise characteristics and a simplified circuit design that reduces the number of system components and costs.
Operating on an input range of 36V to 75V, the module also delivers industry-leading high-power performance, supplying a peak of 1080W at 54V input, 960W at 48V, and 780W at 39V. The PIM also offers industry-leading efficiency of up to 98.8% at 780W for the main unit, resulting in reduced energy and cooling costs; operating at a typical output current of 15A at 82°C, the module requires an airflow of only 1.5 m/s (300 LFM).
Martin Hägerdal, Director of Ericsson Power Modules, commented: "The PIM4710PD meets the demand for cutting-edge, high-power 800W ATCA-based systems, especially in applications with minimal airflow. The world-class efficiency and high-power management of this new module, along with its advanced digital capabilities, offer significant energy and cost savings to power system architects developing advanced blade server applications.".
Like the PIM4610PD, the new PIM offers integrated digital monitoring and a wide range of energy monitoring functionalities via its I2C/PMBus interface. The module also provides integrated hot-swapping and hold-up charge/discharge management. Inputs include dual power supplies with ORing and enable signaling capabilities.
The module's protection features include protection against input transients, reverse polarity, over-temperature, over-current, under-input voltage, and under-input current. Furthermore, to protect processors and other critical silicon devices, such as FPGAs, the module can be configured to allow a well-controlled shutdown procedure. This feature enables the Power Good pin to be de-asserted following an input power drop below the assigned level.
Other specifications include: 3.3V output power management up to 7A; an MTBF of 2.66 million hours, in accordance with Telcordia SR-332 Issue 2, Method 1; and 2250Vdc isolation, meeting the latest IEC/EN/UL62368-1 safety standard. The PIM4710PD has been built to the highest design and manufacturing quality standards, which Ericsson has employed for many years and which provide a high level of confidence to customers.

