The new Agilent N523xA PNA-L vector network analyzers replace the N5230C models. They are available in five frequency models, starting at 300 kHz, with two or four ports available for the 13.5 and 20 GHz models, and two ports available for the 8.5, 43.5, and 50 GHz models.
These models feature increased measurement range (5 dBm higher output power and 20 dB higher dynamic range) and speed (the result of a new synthesizer with a faster switching frequency). They also offer an improved user interface with a 24% larger display. Because the models are 100% compatible with the N5230C PNA-L, no changes to the user's current test setup are required.
The new PNA-L models utilize the innovative components of the Agilent PNA-X, including the CPU and display. They share a common hardware platform, enabling the PNA-L to continuously improve performance as the PNA-X hardware is upgraded. Furthermore, the PNA-L models can run applications previously available only on the PNA-X platform, such as gain compression and continuous-wave fast mode.
The new PNA-L models are suitable for a wide range of applications, including S-parameter measurements of passive components and simple measurements on active devices such as frequency converters and amplifiers. They can also be used for materials measurements and signal integrity analysis.
The Agilent PNA-L is part of the PNA family of network analyzers. The PNA family includes the PNA-L, PNA, and PNA-X series, covering frequencies from 300 kHz to 1.05 THz. The PNA-L is designed for general-purpose network analysis, the PNA is the world's highest-performing vector network analyzer, and the PNA-X provides comprehensive characterization of linear and nonlinear components in a single instrument with a single connection. The PNA family offers advanced connectivity via LAN, USB, and GPIB, a user-friendly architecture based on the Microsoft Windows® operating system, and a comprehensive built-in help system. The CPU and operating system of the PNA family can be upgraded as technologies evolve.
