Embedded Systems
- Details
- Category: Embedded Systems
Congatec is expanding its portfolio of strategic solutions in the Arm processor sector to include processors from Texas Instruments (TI). The first solution platform is the conga-STDA4, a COM SMARC module that incorporates the TDA4VM industrial processor based on Arm® Cortex®.
- Details
- Category: Embedded Systems
High-voltage electrical subsystems for electric and hybrid vehicles require a mechanism to protect the high-voltage distribution and loads in case of overload. To provide designers of these types of vehicles with a faster and more reliable solution for high-voltage circuit protection, Microchip Technology has introduced the E-Fuse demo board, based on silicon carbide (SiC) and available in six versions for 400–800V battery systems and currents up to 30A.
- Details
- Category: Embedded Systems
Mouser now has the OPTIGA™ Trust M IoT Security Development Kit from Infineon Technologies in stock. This development kit allows users to prototype various security use cases and create complete IoT applications such as IP protection, cryptographic offloading, and secure firmware updates, using Infineon's ModusToolbox™.
- Details
- Category: Embedded Systems
MikroElektronika (MIKROE) has announced that Silicon Labs has become the first integrated circuit manufacturer to support the mikroSDK 2.0 Click drivers. This was achieved by adding a hardware driver plugin to MIKROE's Gecko SDK, which is now available in Silicon Labs' Simplicity Studio IDE.
- Details
- Category: Embedded Systems
Mouser now has the Silicon Labs EFR32FG25 Flex Gecko wireless SoCs in stock. These Flex Gecko wireless SoCs are unaffected by 2.4 GHz interference, making them ideal for multi-speed Wi-SUN® OFDM, FSK, and OQPSK applications. They also include an integrated power amplifier (PA) with a sub-1 GHz TX power of up to 16 dBm.
- Details
- Category: Embedded Systems
The AD-SYNCHRONA14-EBZ is a standalone device ideal for evaluating and prototyping applications that require a highly accurate, frequency- and phase-controlled clock source. Its design is based on the Analog Devices AD9545 and HMC7044 and greatly simplifies clock distribution and multi-channel synchronization in complex systems.
- Details
- Category: Embedded Systems
Mouser now has the Microchip Technology EV81X90A PIC32CM Curiosity Pro development board in stock. This development board incorporates Microchip's innovative PIC32CM JH, one of the first microcontrollers on the market based on an Arm® Cortex®-M0+ architecture with AUTOSAR, MBIST, and Secure Boot.
- Details
- Category: Embedded Systems
The EVAL-CN0582-USBZ USB 3.0 four-channel vibration measurement system board reads analog data (IEPE). The analog IEPE inputs can include power supply switches for sensors requiring external power and individual channel offset voltage adjustment. In addition to reading sensor data, the board can provide a sinusoidal signal of variable amplitude and frequency to an external vibration shaker as a stimulus.
- Details
- Category: Embedded Systems
The EVAL-CN0554-RPIZ module from Analog Devices Inc. is a flexible, general-purpose, multi-channel analog input/output (I/O) module. This module is designed to be mounted directly onto a Raspberry Pi, providing this popular single-board computer with an analog input/output interface.
- Details
- Category: Embedded Systems
Mouser now has the Xilinx Kria KR260 robotics starter kit in stock. Offering high-performance industrial vision interfaces and real-time networking, this Xilinx starter kit allows roboticists to streamline their workflows by utilizing the pre-installed Kria K26 system-on-modules (SOM), complete with two 240-pin connectors and I/O for sensors and network connectivity.
- Details
- Category: Embedded Systems
Based on Microchip's PolarFire® FPGA architecture, Aries Embedded introduces the M100PF and M100PFS platforms that provide reliable embedded systems for secure, low-power computing in a wide range of applications, including intelligent embedded vision, industrial automation, communications, and IoT.
- Details
- Category: Embedded Systems
Unless developers are true experts in embedded and edge systems, evaluating and choosing between different form factor standards can be quite difficult. However, depending on the performance level, only one standard is recommended for new system designs. As always, there are exceptions to this rule.
Print Magazine
Annual subscription price:
You will receive all 10 editions that are published each year.
social networks
Popular News Electronics
Spanish electronics magazine. Printed for over 25 years.
Spain - Madrid - All rights reserved © Convertronic Professional Spanish Electronics Magazine.