In recent years, the evolution of ADAS (Advanced Driver Assistance Systems) and other safety features has demanded greater reliability from the power supply systems. As a result, redundant power supplies are increasingly being incorporated into automotive power systems. These supplies can continue to operate basic functions (the sub-MCUs) even in the event of a malfunction in the main system. Since redundant power circuits are added to conventional systems, they must be compact and energy-efficient. ROHM's new products can be used as primary power supplies, leveraging years of expertise in original power supply technology.
The compact BD7xxL05G-C series (2.9 mm × 2.8 mm) meets key requirements for redundant power supply construction by providing high, non-disruptive voltage (max. 45 V) with low current consumption (6.0 µA typ.). At the same time, leveraging ROHM's strengths in analog technology ensures a stable output voltage even under significant battery voltage fluctuations. Unlike standard products with a nearly 1.3 V overshoot that necessitates a large output capacitor to prevent downstream devices, such as sub-MCUs, from exceeding their rated voltage, ROHM's LDOs limit the overshoot to just 0.1 V, enabling the use of much smaller output capacitors. Along with the elimination of the voltage-blocking diode, this reduces the board area by approximately 29% compared to general solutions, while minimizing the number of additional circuits required to configure redundant power supplies. High resistance to disturbance noise is also achieved (proven to eliminate output voltage fluctuation at all frequencies during ISO 11452-2 antenna irradiation tests), reducing the design burden for noise countermeasures.
In the future, ROHM will continue to contribute to improving the reliability of automobiles by developing products that utilize its strengths in both analog and other technologies.
Product Range:
The new BD7xxL05G-C series meets essential requirements, including a compact size, support for operation at 125°C (ambient temperature), and qualification according to the AEC-Q100 automotive reliability standard, as well as the low current consumption required for redundant power supplies used in automotive applications. Furthermore, despite their small size, they can be used as primary power supplies (45V nominal input voltage), with a range that allows for selecting the ideal solution based on the downstream device (i.e., sensor or MCU).
These LDOs are also highly resistant to disturbance noise by suppressing output voltage fluctuations to less than 50 mV (<±1%) across the entire frequency band according to ISO 11452-2 antenna irradiation tests, thus reducing the number of working hours required to counteract noise.
Application Examples:
In addition to redundant power supplies, their compact, low-power design makes them ideal for applications that operate with the engine off.
Brake systems, Body control modules,
Electric power steering, Battery control units,
ADAS ECUs, Real-time clocks,
Drive recorders, Door handle modules.
Online sales information.
Availability: Immediate (in mass production)
Product Information
Applicable Part Numbers: BD725L05G-C, BD730L05G-C, BD733L05G-C, BD750L05G-C
