Other Teams

Details

Category: Other Equipment

March 6, 2013

Afeisa presents the DAP-IM/T, an isolation monitor or monitor in IT networks for medical use in group 2, that is, for networks supplied through an isolation transformer.

Details

Category: Other Equipment

February 18, 2013

When carrying out product validations, online process monitoring, scientific research, or even a simple electrical panel maintenance task, it is very important to make sure that the measured temperature is actually 35.6°C and not 40.2°C.

Details

Category: Other Equipment

February 18, 2013

Seiko Instruments Inc. (SII) introduces the “S-19100” series voltage detectors rated for operation at 125°C. The new voltage detectors are certified to meet or exceed the requirements of the AEC-Q100 automotive qualification standard.

Details

Category: Other Equipment

February 13, 2013

Phoenix Contact's PSK AFS compressed air consumption meters with IO-Link interface monitor compressed air consumption, helping to optimize its use. This enables efficient resource utilization and reduces energy costs.

Details

Category: Other Equipment

February 12, 2013

Labsphere has expanded its LED and light measurement product line with the introduction of the illumia®lite. This portable system offers the accuracy of integrating sphere-based measuring equipment in a portable and easy-to-use device for production, laboratory, or field applications.

Details

Category: Other Equipment

January 16, 2013

Fluke Corporation introduces the Fluke® VT02 Infrared Visual Thermometer, a new troubleshooting and diagnostic tool that also includes an infrared heat map. Until now, electricians and technicians in industrial, HVAC, and automotive environments had to choose between a spot-measurement infrared thermometer or a high-resolution thermal imaging camera.

Details

Category: Other Equipment

January 16, 2013

The Xytronic HV-2 FES welding fume extraction system is designed for professional use and features variable fan speed. It allows for the extraction of welding fumes and simultaneous air filtration at up to two welding workstations. The air volume per hour is 350 m³.

Details

Category: Other Equipment

January 10, 2013

AFEISA presents the DAP-IM/T, an insulation monitor for IT networks in Group 2 medical applications, meaning networks supplied via an isolation transformer. One of the DAP-IM's key features is the integration of overload and overheat monitoring for the isolation transformer, in accordance with the requirements of international and European standards IEC and HD 60364-7-710, as well as IEC and EN 61557-8.

Details

Category: Other Equipment

January 8, 2013

The ADT receives pulses from our Ecowind device via a 2-conductor cable with a maximum recommended length of 50 meters. The instantaneous wind speed is displayed on the screen in km/h, with a guaranteed maximum value of 120 km/h.

Details

Category: Other Equipment

December 17, 2012

The TD1D is a programmable timer that starts from a user-programmed time where the output relay is activated with the NC (Normally Closed) contact. When a signal is received or a key is pressed, it counts down every second until it reaches zero, at which point the relay switches to the NO (Normally Open) contact for 1 second and then returns to the NC state after this time.

Details

Category: Other Equipment

November 30, 2012

The new SEW 4235 ER meter is a portable, autoranging, microprocessor-based instrument that measures earth resistance and resistivity using 4-wire, 3-wire, and 2-wire techniques. Full-scale measurements for earth resistance are 20, 200, and 2000 ohms, with a basic accuracy of 2%. Full-scale measurements for resistivity are 6, 28, 62.8, and 628 kOhms.

Details

Category: Other Equipment

November 5, 2012

Testo Instruments presents the new testo 875i thermal imaging camera, an evolution of the successful testo 875, as the entry-level camera for thermography without sacrificing the most advanced technology.