With various models featuring housings ranging from 32 to 256 mm in 32 mm increments, the MPS family offers maximum flexibility for piston position detection. This eliminates the need to fill the cylinder's T-slots with multiple sensors for specific switching points, thus avoiding the need for mechanical adjustment. Furthermore, the MPS family allows for free selection of the installation direction, ensuring optimal cable entry positioning.
SICK MPS sensors are installed and configured in minutes. They are inserted from above into all standard T-slots, greatly simplifying installation, and are securely fastened with two screws. The start and end points are set using a learning button located anywhere within the sensing area. The status LED simplifies commissioning by displaying the current plunger position. If the product is replaced, the new switching points are defined by the controller, eliminating the need for any mechanical adjustments.
The electrical adjustment of the measuring distance provides optimal resolution and linearity for any structural length. Because the housing design also minimizes blind spots, the entire piston stroke can be utilized, which is particularly useful for short-stroke cylinders.
All MPS sensors offer a detection speed of 0.5 ms and a resolution of 50 µm. Therefore, machines with fast cycle times can also benefit from precise distance measurement.
