AnalogPAK devices are part of Renesas' GreenPAK™ family of programmable mixed-signal array products: cost-effective NVM programmable devices that enable innovators to integrate numerous system functions while minimizing component count, board space, and power consumption. GreenPAK and AnalogPAK ICs functionally replace standard mixed-signal products and standalone discrete circuits. They also provide reliable hardware monitoring capabilities for SoCs and microcontrollers. GreenPAK and AnalogPAK devices offer advantages for virtually any application, including consumer electronics, computing, appliances, industrial, communications, and automotive. With the Go Configure Software Hub and the GreenPAK Development Kit, designers can create and program a custom circuit in minutes.
SLG47011 device delivers a new level of performance for configurable analog integrated circuits. It includes a rich set of digital and analog features, such as a 14-bit programmable multi-channel SAR ADC with a programmable gain amplifier (PGA). The SLG47011 also features flexible, user-defined power-saving modes for all macrocells, allowing designers to disable certain blocks in sleep mode and thus reduce power consumption to the microamp level.
The SLG47011 can be used to extend the performance of an MCU or to offload it. It can also be used in conjunction with an MCU to replace a complex analog front-end (AFE). Key functions supported by the SLG47011 include measurement, data processing, logic control, and data output.
Key parameters of the SLG47011:
Vdd = 1.71 to 3.6 V;
SAR ADC: up to 14 bits, up to 2.35 Msps in 8-bit mode;
PGA: six amplifier configurations, rail-to-rail input/output, 1x - 64x gain;
DAC: 12 bits, 333 ksps;
Hardware math block for multiplication, addition, subtraction, and division operations
; 4096-word flexible memory table block;
Oscillators: 2/10 kHz and 20/40 MHz;
Analog temperature sensor;
Maximum number of highly configurable counter/delay blocks;
I2C and SPI communication interfaces;
Available in a tiny 16-pin QFN package measuring 2.0 mm x 2.0 mm x 0.55 mm, 0.4 mm pitch.
In addition to the SLG47011, Renesas is introducing two other AnalogPAK devices: the SLG47001/3, of cost-optimized, and the SLG47004-A, suitable for automotive applications.
AnalogPAK SLG47001/3 Devices
The SLG47001 and SLG47003 devices enable the implementation of precise measurement systems with a reduced price and a very compact package to address applications such as gas sensors, power meters, measuring equipment, servers, wearables, industrial robots, and sensor modules for industrial and smart homes.
Two ultra-low offset op-amps - 9 µV (max.)
Two 10-bit digital rheostats
Six-channel sampling comparator
Analog
switch Voltage reference
59-byte pattern generator
2k/10k/25MHz oscillators
Fully configurable blocks: LUTs, flip-flops, shift registers, timers, counters, delays
AnalogPAK SLG47004-A Device
The SLG47004 -A offers the functionality of the SLG47004 devices with the addition of Grade 1 automotive qualification for applications such as infotainment, navigation, chassis and body electronics, automotive display clusters, and more. The new devices support a temperature range of -40°C to 125°C.