Converters
- Details
- Category: Converters
Bel Fuse Inc. has announced the expansion of its RCM series of converters with the RCM300 series dual-output DC-DC converter for rail and transportation systems. These dual-output converters are reliable power supplies that deliver 300W at +24V/-24V, the two input voltage ranges that cover all common rail batteries.
- Details
- Category: Converters
RECOM has added a 60W DC/DC converter to its product portfolio, offering high power density and medical-grade insulation for board mounting. The cost-effective REM60-W is available with two input ranges, 9-36VDC and 18-75VDC, each with a choice of tightly regulated single and dual outputs: 5V, 5.1V, 12V, 15V, 24V +/-12V, and +/-15V. The DC/DC converter's compact size of only 2.3" x 1.5" x 0.5" (57.9 x 36.8 x 12.7mm) delivers industry-leading power density for a 60W component.
- Details
- Category: Converters
Mecter introduces Mornsun's new BRICK Green power supplies: the LBH150-13Bxx 1/2 brick series and the LBF750-13Bxx full brick series. They can operate reliably in harsh environments with large temperature variations and enclosed spaces, such as industrial, communications, wireless, instrumentation, server, computer, semiconductor, and other applications.
- Details
- Category: Converters
The switching action of DC-DC converters can introduce unwanted noise in both normal and differential modes, creating unacceptable levels of interference across many parts of the frequency spectrum. Front-end (or power line) filters are used in DC-DC converters to mitigate electromagnetic interference (EMI). These filters can be custom-designed or off-the-shelf to ensure that a design with a switched-mode power supply (SMPS) or a DC-DC converter from a supplier meets regulatory electromagnetic compatibility (EMC) standards for conducted and radiated emissions (e.g., FCC, ETSI, CISPR, MIL-SPEC, etc.).
- Details
- Category: Converters
DC/DC converters for railway applications typically operate with a nominal input of 72V, 96V, or 110VDC with dips and surges. To address this application, RECOM's new, cost-effective RPxx-RAW range of isolated and regulated converters offers an ultra-wide input range of 36V to 160VDC (200V for 1s) with a selection of single and dual outputs: 3.3V, 5V, 12V, 15V, 24V, +/-5V, +/-12V, and +/-15V.
- Details
- Category: Converters
This article presents a low-power analog-to-digital converter (ADC) solution for high-precision measurement applications. A typical application in electrical engineering is the recording of physical quantities by sensors and their transmission to a microcontroller for further processing. ADCs are necessary to convert the analog output signals from the sensors into digital signals.
- Details
- Category: Converters
Mecter introduces the 3rd generation of Mornsun PV40-29BxxR3 series DC/DC converters for the photovoltaic, energy storage, and other renewable energy industries. The R3 series offers highly cost-effective, high-quality, safe, and reliable power solutions. Its dimensions are 80% smaller than the PV40-29Bxx series, yet it delivers improved performance. It also withstands a high transient voltage of 1700VDC for 30 seconds, operates within a wider temperature range, and is designed to meet CSA/CE/UL standards.
- Details
- Category: Converters
Mecter introduces the Mornsun PV200-29BxxR3 series of 200-watt DC/DC converters for renewable energy industries, such as solar thermal, photovoltaics, high-voltage frequency conversion, and more. These high-quality, safe, and reliable power supplies offer a cost-effective solution. Their dimensions have been reduced by 56% compared to the PV200-29Bxx series, while maintaining improved performance. They feature a high transient voltage of 1700VDC for 10 seconds, high efficiency up to 93%, optional screw or lead terminals, and are designed to meet CE/UL standards.
- Details
- Category: Converters
The new TRI 1 and TRI 1SM are a series of high-isolation regulated DC/DC converters housed in a compact SIP-8 and SMD-14 enclosure. The key feature of the TRI 1(SM) series is a reinforced isolation system capable of withstanding high test voltages (8000 VDC for 1 s and 3000 VAC for 60 s) and operating voltages (480 VACrms). Their efficiency of up to 84% allows for safe operation from -40°C to +85°C without any reduction in capacity.
- Details
- Category: Converters
OLFER Electronics presents the new DC/DC converters for medical applications, brought to market by our supplier P-DUKE. This is the MPK06 series, which meets 2xMOPP isolation requirements. This device offers a 6W output power and features an 8mm isolation distance, a maximum leakage current of 2µA, and comprehensive protection functions.
- Details
- Category: Converters
Commercial trucking is the backbone of the American economy. This has never been more evident than in recent years, when supply chain disruptions related to Covid-19 hit the country. Moreover, it is becoming increasingly difficult to find people willing to drive trucks.
- Details
- Category: Converters
RECOM has added a 5W component in a miniature 1" x 1" x 0.4" (25.4 x 25.4 x 10mm) plastic package to its economical "K" series of DC/DC converters, which feature advanced design and manufacturing technology. The REC5K-AW has a wide 4:1 input range (9-36VDC) and a single regulated 5VDC output.
- Details
- Category: Converters
RECOM introduces board-mounted DC/DC converters with 36–160V input. A new range of DC/DC converters for railway applications from RECOM sets a standard for power density and cost-effectiveness with a 40W output in a 50.8 x 25.4 x 10.2 mm (2" x 1" x 0.4") through-hole, board-mount package.
- Details
- Category: Converters
The TEP 150UIR and TEP 200UIR railway-certified DC/DC converter series are designed to deliver maximum reliability in the most demanding applications. Their ultra-wide 12:1 input voltage ranges allow application engineers to work with a broad range of system voltage ratings using a single design.
- Details
- Category: Converters
Many low-power modular DC/DC converters available on the market are designed for low-cost, hand-assembly, suitable only for the simplest circuits with their inherent performance limitations. RECOM has broken this mold by releasing direct upgrades to several of its popular product ranges, achieving significant performance improvements through advanced circuitry and automation techniques, but without a price increase.
- Details
- Category: Converters
In recent years, the demand for renewable energy sources such as photovoltaics and energy storage has increased dramatically. In response, the manufacturer MEAN WELL, together with its distributor Electrónica OLFER, launched the DDRH-60 and RSDH-150/300 series.
- Details
- Category: Converters
The RSDW/RDDW/RSD/DDR series appeared on the market some time ago, manufactured by MEAN and distributed in Spain and Portugal by Electrónica OLFER. These encapsulated DIN rail DC/DC converters are designed for railway and industrial applications, with a power output between 8W and 480W (see details in Table 1).
- Details
- Category: Converters
RECOM's extensive range of low-power AC/DC converters has been further expanded with a 30W component in a class-leading package size of 40 x 52.5 x 25.5mm (1.6" x 2" x 1"). The highly efficient RACM30-K/277 series delivers 30W of continuous power (36W peak) in an ambient range of -40°C to +60°C in free air and up to +90°C with power reduction.
Print Magazine
Annual subscription price:
You will receive all 10 editions that are published each year.
social networks
Popular News Electronics
Spanish electronics magazine. Printed for over 25 years.
Spain - Madrid - All rights reserved © Convertronic Professional Spanish Electronics Magazine.